AirTools Ulysses 8116 Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Musikanlagen AirTools Ulysses 8116 herunter. AirTools Ulysses 8116 10 Seiten. 16x analog output

Seite drucken
Quick Start Guide
Ulysses 8116
16x Analog Output
LED Color Table, Rear Panel
LED Color Table
Bi-color LED
Indicated Color/Status
POWER
Green - Solid
Green - Flashing (upon initial powerup)
COMM
Green
Orange
SYMLINK
Green - Solid
Green - Flashing
STATUS
Green - Solid
Green - Blipping
Orange - Solid
Orange - Blipping
Red - Flashing
Red - Solid
Red - Blipping
Further discussion of both status indications and redundant operation is covered in the Redundant Operation section.

Rear Panel

ULYSSES 8116 16x ANALOG OUT
Engineered By
www.airtoolsaudio.com
100-240
VAC
50-60Hz
60 WATTS
MAXIMUM
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MTLK TERR, WA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
MANUFACTURED BY SYMETRIX, INC. MTLK TERR, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
Item
POWER INPUT
DEVICE CONFIG
RS-232
RS-485
10/100 Base T
TC89 INPUT
SYMLINK INPUT/OUTPUT
REDUNDANCY LINK
ANALOG OUTPUTS
RS-232
10/100 Base T
RING
UNIT
GND
B
A
1
2
4
8
16
1
2
4
8 16
DEVICE CONFIG
RS-485
ETHERNET
Description
IEC 3 prong jack
8 + 5 DIP switch blocks
Female DB9
Euroblock
RJ-45
Female BNC
2 x RJ-45
Euroblock
Euroblocks
To download the latest version of Studio Matrix Designer, the Windows application
that controls all Studio Matrix hardware, go to: www.airtoolsaudio.com
Meaning
Unit is powered on
Number of flashes indicates device ID number
Active serial or SymLink bus communications
Active Ethernet communications
Valid SymLink bus connection
Invalid SymLink bus connection - Check DIP switch settings of all
connected units. Check cabling.
Unit is Primary and active
Unit is Primary and inactive
Unit is Secondary and active
Unit is Secondary and inactive
Unit has a fatal error and is off-line
Unit has a non-fatal error and is active
Unit has a fatal error and is inactive
TC89
SYMLINK
REDUNDANCY
INPUT
LINK
OUTPUT
INPUT
OUT GND IN

What It Does

Accepts power from detachable IEC power cable (100-240 VAC, 50-60 Hz, 60
Watts max).
Configures the Ulysses's ring number (1-31), device address (1-15) as well as the
communications interface (RS-232/Ethernet) and Primary/Secondary designation.
Addressing is done in a binary fashion. (See Device Address Quick Reference).
Serial communications interface with Studio Matrix Designer on the host PC or a
3rd party accessory controller. (Mode is determined by the Ethernet/232 mode switch.)
Connects to a Control I/O, ARC-PS, ARC or 3rd party RS-485 compatible controller.
Used for Ethernet control (must be enabled via the Ethernet/232 DIP switch).
Accepts (ESE) TC89 time code to drive the real-time clock and event scheduler. If
TC89 is used, it should be fed to the unit(s) at address 1 (Primary or Primary +
Secondary).
Connects the Ulysses to the SymLink ring network providing an ultra-fast
64-channel audio/data backbone. OUTPUT connects to the next unit in the ring,
INPUT connects to the previous unit in the ring.
Connects to a Secondary Ulysses for redundant operation wired IN to OUT, OUT
to IN and GND to GND.
16 x analog line level audio outputs operating at +4 dBu.
Symetrix
Engineered by
8
7
6
5
4
12
16
15
14
13
TM
3/9
3
2
1
11
10
9