DT Research DT395BV Grundlegendes Betriebshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Grundlegendes Betriebshandbuch für Tablette DT Research DT395BV herunter. DT Research DT395BV 9 Seiten. Mobile pos tablet
Auch für DT Research DT395BV: Grundlegendes Betriebshandbuch (4 seiten)
Seite drucken
Input/ Output Ports
A
Barcode Scanner (optional)
B
Headphone Jack
C
USB Port
D
DC Power Input
E
Camera (optional)
F
LAN/ HDMI (optional)
G
LAN/ RS232 (optional)
Button Functions
BUTTON
ACTION
1
Security button.
As scanner trigger when equipped with the scanner module
2
Power on.
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
3
Wi‐Fi switch.
4
Menu button.
5
Up/ down button.
To adjust the monitor brightness and the speaker volume
6
Monitor mode switch.
To switch to display the video signal from HDMI port
Battery and Power Management
The DT395BV is equipped with an internal Li‐Ion battery pack and an optional battery pack that clips
(hot‐pluggable) onto the back of the tablet. The period between battery recharges can be significantly
lengthened by putting the tablet into Standby mode through the Power Button (see Buttons Function Table)
whenever the tablet is not in use. Depending on the operating software, the DT395BV may also be configured
to enter various power‐saving modes via the Power Button or through timed entry.
DT395BV
3
ENGLISH