DT Research MS600Ns Betriebshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Digitale Beschilderung DT Research MS600Ns herunter. DT Research MS600Ns 2 Seiten.

Seite drucken

Connec�ng Peripherals

Make sure your monitors are connected the Mul� Screen Appliance with suitable cables. A�er

the peripherals are connected, plug the power cord into the Appliance and insert the other end

into a power outlet.

NOTE: DO NOT connect the power cord before connec�ng all cables to the MS Appliance.

NOTE: Make sure the power supply switch is on before you power on the system.

Using Cable Extenders

To be compa�ble with the Mul� Screen Appliance, the extenders should be with EDID

management

func�on. Once you make sure the display issues are due to the video cable extenders, please

contact your local reseller or system integrator to recommend veriﬁed extenders to you.

Powering ON and OFF

The Power Bu�on is located on the front of the Mul� Screen Appliance.

To turn the Mul� Screen Appliance on, push and release the Power Bu�on on the front bezel.

The power LED will be lit (blue), and the corresponding interface will be shown on the display

monitors.

To turn oﬀ the device, use the so�ware shutdown interface provided.

If your MS player hangs up, please restart it from WCM or RDP rather than pressing the power

bu�on to restart, otherwise the OS may become corrupted.

ENGLISH

Connect Player and Register to WCM Server

When you power on your Mul� Screen Appliance, the registra�on dialog will be launched

automa�cally. You can also launch it from Start | All Programs | DT Research | WebDT Signage

Player | Register Player Again.

NOTE: If your signage player is located in a LAN with a WCM server, the player will automa�cally

Registra�on Informa�on:

Player name: Leave default name or give a new name

Group name: If you did not create a group in WCM

server yet, leave it blank now

Organiza�on name: my site (default)

Access Password: 123456 (default)

Publish Server URL:

h�p://(server IP address): (port number)/publish

or, h�p://localhost: (Port number)/publish

• To exit the full screen introduc�on, press "Ctrl+Shi�+Space" to exit the WebDT Signage Player.

• To re-launch the WebDT Signage Player, navigate to Start | All Programs | DT Research |

WebDT Signage Player | Start player.

• To register this signage appliance to another WebDT Content Manager Server, navigate to Start

| All Programs | DT Research | WebDT Signage Player | Register Player Again, and then the

Player Registra�on dialog will be launched. Fill in all ﬁelds to register. Click OK to register and

connect to the preferred WebDT Content Manager Publish Server.

• Please refer to documenta�on included in the DVD of your package to start managing your

content, playlists and schedules via WebDT Content Manager.

Mul�ple Screen Layout Designer/MS Quick Start Guide

DT Research provides this tool to help you adjust the screen layout. Mul�ple Screen Layout Designer

can be installed on a PC or laptop to manage the screen layouts of the Mul� Screen Appliances in

the same LAN. You can install this applica�on and view the Quick Start Guide from the WCM DVD or

download the Mul� Screen Appliance Quick Start Guide from:

www.signage.dtri.com/download/quick_start_guides/WCM6_Pro_Multi_Screen_Appliance_Quick_

Start_Guide_en.pdf

ENGLISH