DT Research SA166CR Grundlegendes Betriebshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Grundlegendes Betriebshandbuch für Digitale Beschilderung DT Research SA166CR herunter. DT Research SA166CR 2 Seiten.

Seite drucken

I/O Port

Precau�ons

• Always exercise care when opera�ng and handling.

• Never disassemble any por�on of the enclosure, as this will void any product warranty.

• Do not use any AC/DC adapter other than the one provided with the device or acquired from

the manufacturer or its partners.

• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately

power down the product and disconnect all power sources.

• Please report the problem to your device provider immediately.

• Pushing on the Power Bu�on again will restart the appliance.

Powering ON and OFF

The Power Bu�on is located on the back of the Signage Appliance.

To turn the Signage Appliance on, push and release the Power Bu�on on the front bezel. The

power LED will be lit (blue), and the corresponding interface will be shown on the display

monitors.

To turn oﬀ the appliance, use the so�ware shutdown interface provided.

If your Signage Appliance hangs up, please restart it from WCM or RDP rather than pressing the

power bu�on to restart, otherwise the OS may become corrupted.

Server Installa�on

Please refer to the corresponding User Guides for so�ware installa�on instruc�ons.

Connect Player and Register to WCM Server

When you power on your Signage Appliance, the registra�on dialog will be launched

automa�cally. You can also launch it from Start | All Programs | DT Research | WebDT Signage

Player | Register Player Again.

NOTE: If your signage player is located in a LAN with a WCM server, the player will automa�cally

ENGLISH

USB 2.0

USB 3.0

HDMI

1920 x 1080 @ 60Hz

DisplayPort

1920 x 1080 @ 60Hz

Registra�on Informa�on:

Player name: Leave default name or give a new name

Group name: If you did not create a group in WCM

server yet, leave it blank now

Organiza�on name: my site (default)

Access Password: 123456 (default)

Publish Server URL:

h�p://(server IP address): (port number)/publish

or, h�p://localhost: (Port number)/publish

• To exit the full screen introduc�on, press "Ctrl+Shi�+Space" to exit the WebDT Signage Player.

• To re-launch the WebDT Signage Player, navigate to Start | All Programs | DT Research |

WebDT Signage Player | Start player.

• To register this signage appliance to another WebDT Content Manager Server, navigate to Start

| All Programs | DT Research | WebDT Signage Player | Register Player Again, and then the

Player Registra�on dialog will be launched. Fill in all ﬁelds to register. Click OK to register and

connect to the preferred WebDT Content Manager Publish Server.

• Please refer to documenta�on included in the DVD of your package to start managing your

content, playlists and schedules via WebDT Content Manager.

VESA Moun�ng Bracket Installa�on Guide for SA166CR

The DT Research Signage Appliance package includes a VESA-compliant moun�ng bracket (1)

which mounts the SA166CR (2) onto a VESA-compa�ble monitor or display.

NOTE: The VESA Moun�ng Bracket is compa�ble with most displays and monitors that support

the VESA standard.

Step1:

• Locate the exis�ng moun�ng holes on the monitor.

• Line the bracket holes up with the holes on the back of the

monitor, as pictured.

• Place the screws to hold the moun�ng bracket in place and

�ghten the screws (do not over-�ghten).

Step2:

• Remove the two M3 screws (3) originally on the SA166CR

signage appliance.

• Place the SA166CR (2) on the bracket rail with the interface ports

side facing downwards so that the two moun�ng holes on the

appliance are aligned with the exis�ng holes on the rail (see

picture).

Step 3:

• Apply and �ghten the screws into their original loca�ons and make

sure that the bracket and the SA166CR are properly secured.

<1>

<2> <3>

ENGLISH