Boulevard DVP41LKR-1 Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Zubehör für Kamine Boulevard DVP41LKR-1 herunter. Boulevard DVP41LKR-1 2 Seiten. Designer porcelain panel kit

Seite drucken

FOR USE WITH: DESIGNER SERIES FIREPLACES ONLY

INSTRUCTIONS MUST BE LEFT WITH THE OWNER AFTER INSTALLATION.

NOTE: INSTALL LINER BEFORE INSTALLING THE LOGS.

PLACING THE OPTIONAL PORCELAIN PANELS INTO THE

DVTL FIREPLACE:

Remove the Glass Door assembly and set aside.

Locate and remove the two Phillips head screws from each

side of the firebox face. See figure below.

Slide the left and right side porcelain panels into the firebox

and secure the panels with the screws removed in step 2.

See figure at right.

Install the Back porcelain panel to the back of the fireplace.

Please note that the angled flange with the two slotted holes

will be at the top. When placing the Back panel in place,

put one end all the way back in the corner against one of

the Installed Side panels. Gently rotate the other end of the

panel rearward towards the back of the fireplace.

Align the top slotted holes in the Back panel (top flange) with

the pilot holes in the upper fireplace baffle. Use a Phillips

screwdriver to install two #8-18 x 1/2" screws to secure the

Back panel.

Liner installation is complete.

Re-install the Glass Door assembly.

LEFT PANEL

(28482BL)

BACK PANEL

(28481BL)

29849-5-0220

INSTALLATION INSTRUCTIONS

DESIGNER PORCELAIN PANEL KIT - DVP41LKR-1

Empire Comfort Systems Inc. • Belleville, IL

PORCELAIN PANEL KIT

#8-18 X 1/2" PHILLIPS TRUSS HEAD SCREW (2)

REMOVE SCREWS

BOTH SIDES

RIGHT PANEL

(28483BL)

Page 1