DTC SOL8SDR-H2 Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware DTC SOL8SDR-H2 herunter. DTC SOL8SDR-H2 4 Seiten.

Revision: 1.0

Overview

This quick start guide provides instructions and diagrams describing how to quickly connect and

configure the SOL8SDR-H2 device to join a Mesh network.

Note: If configuring as a SOL-TX or SOL-RX, please refer to the relevant user guides.

Supporting software applications and detailed user guides can be downloaded from DTC's WatchDox

facility. Please contact the DTC support team:



Phone US: +1 571 563 7077



Phone UK: +44 1489 884 550



Email US:



Email ROW:

Connections

The minimum connections required for an SDR-H2 to join a Mesh network are power and antennas.

An Ethernet connection to a PC is required for initial configuration.

IMPORTANT: Batteries will be shipped with minimal charge to comply with safety regulations. It is

essential to charge the batteries before operation.

Bring the contact terminals of the battery and SOL8SDR-H2 together firmly, as illustrated below.

Secure by rotating the body of the SOL8SDR-H2 in a clockwise direction and/or the body of the

battery in an anti-clockwise (counter-clockwise) direction until the battery is locked into position.

SOL8SDR-H2 Quick Start Guide

Commercial in Confidence

(no restricted content)

Page 1