DTC Audio TRAmp-MP3 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DTC Audio TRAmp-MP3 herunter. DTC Audio TRAmp-MP3 8 Seiten. Portable wireless amplifier with mp3 player/recorder

Seite drucken

6. Technical Specification

Amplifier
Max. Power Output
Number of Mic Inputs
Operation
Volume Control
Tone Control
Aux. Input/Output
Speaker
Built-In Battery
Charging
Discharge Protection
Battery Indicator
AC/DC Adapter (SMPS)
Weight
Dimensions
Wireless System
Carrier Frequency
Pre-set Frequency
Frequency Stability
Modulation
Frequency Response
Max. Distortion
Dynamic Range
RF Transmitter Power
Max. SPL
Receiving Method
S/N (15kHz DAV 100mV)
MP3 Player
Internal Memory
External Memory
USB Version
Recording
EQ
Display
Repeat
Driver
Specification
RMS 50-Watt
1 x Wired Microphone, 1/4" Phone jack
1 x UHF Wireless Microphone (UHF 16-Ch Selectable)
Approx. 4 ~ 5 hours depending on operating condition
1 x Wired Microphone
1 x Wireless Microphone
1 x Treble / Bass
1 x In-RCA / 1 x Out-RCA with Volume control
Full range 6" Dynamic + 2" Tweeter
12V/3.2A, Rechargeable & Explosion-proof
Approx. 10 hours for a Single charge
10.4V (Factory set: Lowest voltage for ABMR)
Monitoring by 4 LEDs
AC100-240V 50-60Hz / DC15-16V/3A UL/CE/CSA/TÜV
Approx. 6.9kg-Nett
280mm(H) x 205mm(W) x 245mm(L) Nett
Specification
UHF 863-865MHz (Other frequencies are optional)
16-Ch Selectable Frequencies
±0.005%
PLL Synthesized
50Hz – 15khz ±2dB
³0.3% at 1kHz, 15kHz DAV
More than 90dB
10mW (Can be adjusted basing on requlation)
110dB SPL
F3E
More than 90dB
Specification
Built-in 64MB NAND Memory
Support In-slot SD Card up to 1 GB
1.1
About 60min (Sampling of 48K)
Jazz, Classic, Rock, Pop, Normal
LCD with Back-light
A-B Repeat Fuction
Plug & Play over Windows98