3onedata IES5024-24F-P Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter 3onedata IES5024-24F-P herunter. 3onedata IES5024-24F-P 6 Seiten. Managed industrial ethernet switch ies5024 series
Seite drucken
5.
The power LED
6.
Relay alarm LED
7.
Rackmount ears
8.
Power input and Relay output terminal block
9.
10/100BaseT(X) (RJ45) ports
10.
100Base-FX ports
11.
Rear panel connector LEDs
IES5024-20F-P (100~240VAC/DC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. Relay alarm LED
6. The power LED
7. Power input and Relay output terminal block
8. 10/100BaseT(X) (RJ45) ports
9. 100Base-FX ports
10. Rear panel connector LEDs
IES5024-24F-P (100~240VAC/DC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. Relay alarm LED
6. The power LED
7. Power input and Relay output terminal block
8. 100Base-FX ports
9. Rear panel connector LEDs
【Power supply input】
The Industrial Ethernet switches have singe power and
redundancy power two kinds of power input. The singe power
series
rear
panel
provides
5
bit
100~240VAC/DC power entered (L/+, GND, N/-) and relay
output (R+, R-).The unmanaged Ethernet switch relay alarm
function is invalid. Terminal diagram is as follows:
The redundancy power series rear panel provides two
terminal blocks (5 bits) for P1 and P2 input. The redundant power
can be used independently. P1 and P2 can supply power at the
same time, once either of these two powers fails, another power
can acts as backup automatically to ensure reliability of the
network. Voltage input range is 100 ～240VAC/DC (terminal
block defined as P1: L/+, GND, N/-; P2: L/+, GND, N/- ).
Important notice:
1. Power ON operation: first of all, insert power cable's terminal
block into device's power port, then insert power supply plug into
power source
2. Power OFF operation: First off all, unpin power plug, then
strike the terminal block, please take care of operation sequence.
【Dimension】
The series of products are the same size, and the number of the
Ethernet interface is different. Unit (mm)
Single Power Series
wiring
terminal
for
Redundancy Power Series