DTI Fast-Tach Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Messgeräte DTI Fast-Tach herunter. DTI Fast-Tach 2 Seiten. Wireless tachometer

Features:

Activation:

Acuracy:

Max reading: 19,990 RPM

Battery:

Basic operation:

LIMITED WARRANTY: Design Technology, Inc. warrants that for a period of ONE (1) YEAR from the time

of purchase it will repair or replace the Fast-Tach at no charge, if it fails to function properly due to defect in

materials or workmanship. Damage due to improper care or use is expressly excluded from this warranty. All

implied warranties are limited to the use of this instrument as directed above and Design Technologies does not

assume of or authorize anyone to assume for it any other obligation. The instrument should be returned, prepaid

to Design Technology Inc. for warranty consideration

Wireless Tachometer

The Fast-Tach is "Pulse" activated tachometer - i.e. the pulses

generated by the ignition system on any gasoline engine can be

detected and activate the electronic tachometer. The tach can

be set to display proper RPM on a single cylinder as well as multi

cylinder, two or four cycle, engine. By aiming the tach towards the

spark plug at a distance of approx. 0 to 15 inches (0 to 35 cm) the

tach will display proper engine RPM. The tach can also display the

MAXIMUM RPM recorded after checking the RPM of an engine.

Pulses from the ignition triggers the Fast-Tach to read engine RPM.

Fast-Tach can be set to properly record any single or multi cylinder

engine, 2 or 4 cycle by changing the display mode (see advanced

operation pg2). Default setting is 1 pulse per revolution (360°)

adjustable to 1 pulse per every 2 revolutions (720°) or 2 pulses per

revolution (180°)

+- 10 rpm in default mode and +- 20 in 720° mode. Display updated

every 0.5 seconds

Lithium 3V (CR2430) - Replacable

1. To start the Fast-Tach push the ON button and the

Fast-Tach is ready to display the actual RPM of an

engine that produces 1 spark per revolution (to change

spark pulses per revolution see page 2). Hold the tach

0 to 15 inches (0 to 35 cm form the spark plug.)

2. Fast-Tach will save the Maximum rpm that the unit has read.

To view press the On/Mode button and the "MAX" will appear on the

display (to reset MAX rpm see page 2)

3. Fast-Tach will turn OFF automatically after 1 minute.

See back for advanced operations ➜

Design Technology, Inc.

768 Burr Oak Drive

Westmont, IL 60559

630.920.1300

(Fax: 630.920.0011)