ATUNE ANALOG SBB-A5527 Handbuch - Seite 17
Blättern Sie online oder laden Sie pdf Handbuch für Lautsprechersystem ATUNE ANALOG SBB-A5527 herunter. ATUNE ANALOG SBB-A5527 19 Seiten. 16" bluetooth soundbar speaker
Seite drucken
SYMPTOM
No power
The Adapter is not connected
Soundbar is in power off mode
Volume level in minimum position
No sound or
low sound
The paired/connected device
is not in playback mode
Input source incorrect
Sound distortion/rattle
Volume level too high
Out of range
Remote Control
not functioning
The battery in the remote
control is drained
Bluetooth
The external device is
too far from soundbar
reception failure
Have not paired
TROUBLESHOOTING
POSSIBLE CAUSE
17
POSSIBLE SOLUTION
Connect the Adapter to the wall outlet
Press the
button on soundbar
or press the
button on remote
control to power on
Raise the volume level by pressing
the + Button on soundbar
Or press VOL + button on remote control
Play
music/movie
in
the
connected device and make sure the
volume level is high
Press the
button repeatedly
to switch to desired mode
Reduce the volume level by pressing
the - Button on the top of the
Or press VOL - button on remote control
Reduce the volume level of the
paired/connected device.
Point the remote control to the
remote sensor on the unit within
16 feet, +/-30 degress
Replace with new battery
Put the external BT device close to the
soundbar
Pair the soundbar with the BT Device
as mentioned
paired/
soundbar