3onedata IES5328 Series Handbuch zur Schnellinstallation - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter 3onedata IES5328 Series herunter. 3onedata IES5328 Series 3 Seiten. Layer 2 managed industrial ethernet switch
Seite drucken
LED
Indicate
Description
PWR is disconnected or running
OFF
abnormally
Blinking
The system is running normally
The system is not running or
RUN
OFF
running abnormally
ON
System is running abnormally
Power supply or port link has
ON
alarm
ALM
Power supply and port link have
OFF
no alarm
Port has established valid
ON
network connection
Link(G1
Port is in a network
Blinking
-G28)
communication status
Port hasn't established valid
OFF
network connection.
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device's IP address in the address bar of
the computer browser.
Step 3
Enter device's username and password in the
login window as shown below.
Step 4
Click "Login" button to login to the WEB interface
of the device.
Note:
The
default
IP
address
"192.168.1.254".
The default username and password of the device are
"admin123".
If the user name or password is lost, user can restore it
to factory settings via restoring factory setting button
or management software; all modified configurations
will be cleared after restoring to factory settings, so
please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
Gigabit SFP
1000Base- X, SFP slot
1000M Combo port
10/100/1000Base-T(X) RJ45
or 100/1000 Base-SFP
interface (optional)
Gigabit copper port
10/100/1000Base-T(X)
self-adapting
half/full duplex self-adaption or
forced working mode, support
MDI/ MDI-X self-adaption
Console port
Alarm interface
Indicator
Switch Property
Backplane bandwidth
Packet buffer size
MAC table size
of
the
device
is
Power Supply
Input power supply
Access terminal block
Power Consumption
Model I
Working Environment
Working temperature
Storage temperature
RJ45
port,
Working humidity
Protection grade
CLI command management
port (RS-232), RJ45
5-pin 5.08mm pitch terminal
block (R+/R-), support 2 relay
alarm information outputs
Power indicator, system alarm
indicator,
device
running
status
indicator,
interface
connection/running
status
indicator
56G
12Mbit
16K
Model
I:
220VAC
(100~240VAC/DC) dual power
supply
Model II: 48VDC (36~72VDC)
dual power supply
Model III: 24VDC (18~72VDC)
dual power supply
AC
product
supports
single-phase
socket
with
rocker switch
DC product supports 5-pin
5.08mm pitch terminal blocks
No-load: 10.5W@220VAC
Full-load: 25.3W@220VAC
-40~75℃
-40~85℃
5%～95% (no condensation)
IP30(metal shell)