3onedata IES618 Series Handbuch zur Schnellinstallation - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter 3onedata IES618 Series herunter. 3onedata IES618 Series 3 Seiten. Managed industrial ethernet switch
Auch für 3onedata IES618 Series: Benutzerhandbuch (4 seiten)
Seite drucken
computer browser.
Step 3
Enter device's user name and password in the
login window as shown below.
Step 4
Click "OK" button to login to the WEB interface of
the device.
Notes:
The default IP address of the device is "192.168.1.254".
The default user name and password of the device is
"admin".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M Copper Port
10/100Base-T(X),
Automatic Flow Control, Full/half
Duplex
Mode,
Autotunning
100M fiber port
100Base-FX, optional SC/ST/FC
Console Port
CLI command management port
(RS-232), RJ45
Alarm interface
2-pin 7.62mm pitch terminal
blocks, support 1 relay alarm
output, current load capability is
1A@24VDC or 0.5A@120VAC
Indicator
Power
supply
indicator, interface indicator, alarm
indicator
Switch property
Backplane bandwidth
2G
Packet buffer size
1Mbit
MAC Address Table
2K
Power supply
Input power supply
12~48VDC, dual power supply
redundancy, non-polarity
Access terminal block
4 pins 7.62mm pitch terminal
blocks
Power consumption
No-load: 1.38W@12VDC
Model I
Full-load: 3.47W@12VDC
Model II
No-load:
Full-load: 5.68W@12VDC
No-load: 4.93W@12VDC
Model III
Full-load: 6.40W@12VDC
Working
environment
Working temperature
-40～75℃
Storage temperature
-40～85℃
Working humidity
5%～95% (no condensation)
Protection grade
IP40 (metal shell)
3
RJ45,
MDI/MDI-X
indicator,
run