ATX SignalOn Series Handbuch für Installation und Betrieb - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Schalter ATX SignalOn Series herunter. ATX SignalOn Series 16 Seiten. L-band splitter module
Auch für ATX SignalOn Series: Handbuch für Installation und Betrieb (16 seiten)

Seite drucken

PRODUCT DESCRIPTION

2.
Product Description
L-Band microwave signals operating in the 950 MHz to 2.145 GHz frequency band are received from a satellite downlink
antenna. Signals are then typically fed to multiple satellite receivers such as analog receivers, analog Integrated Receiver/
Decoders or digital Integrated Receiver/Transcoders. When these multiple receiving devices are fed from the same satellite
antenna, it is necessary to split the downlink signal into several equal outputs. These split signals are then fed to each
receiving device individually.
Each splitter configuration has two ports that pass DC voltage(s) from the receiver(s) assigned to supply power to the Low
Noise Block (LNB). Table 1 shows the power pass port assignment for each individual module type.
MODULE TYPE
2–way
4–way
8–way
SignalOn
Series – L-Band Splitter Module – Installation & Operation Manual
®
DC POWER PASSING PORTS
1 & 2
1 & 4
1 & 8
Table #1: Power Passing Ports
CHAPTER 2: PRODUCT DESCRIPTION
MAXIMUM POWER RATING
24 VDC at 1 Ampere
24 VDC at 1 Ampere
24 VDC at 1 Ampere
2-1