Comtrend Corporation PG9141s-PoE Handbuch zur Schnellinstallation - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Adapter Comtrend Corporation PG9141s-PoE herunter. Comtrend Corporation PG9141s-PoE 7 Seiten. Powerline ethernet adapter with wifi
Seite drucken
2. Within two minutes, press the WPS button (often the WPS/Reset
button) on your client to activate WPS.
Note: Please check the instructions for your wireless client for how
long you need to hold down its WPS button to activate WPS.
3. The devices will establish a connection. You can now connect to the
PowerGrid 9142s' wireless network with a WiFi device, as described
in section B. To confirm a successful connection you can see if your
client device (e.g. smartphone, notebook, tablet) displays the WiFi
connected icon.
F. Troubleshooting
The following information should help you diagnose basic setup or
installation problems.
1. POWER LED is OFF: If the POWER LED goes off, please make
sure that your power outlet is working properly (perhaps by testing
with another device).Then plug in your PowerGrid 9142s again. If
the POWER LED does not light up, please contact your equipment
supplier for further information.
Page 5