AIRTRONICS M11X Betriebshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Fernsteuerung AIRTRONICS M11X herunter. AIRTRONICS M11X 13 Seiten. 2.4ghz digital high response system
Seite drucken
DRIVING POSITION ADJUSTMENTS
Every effort has been made to provide optimum transmitter weight and balance on your M11X FHSS 2.4GHz radio control
system. The wheel and trigger are placed on the same axis, permitting you to focus on steering and throttle control. The driving
STEERING WHEEL TENSION
The steering wheel spring tension can be adjusted using a
To decrease steering wheel spring tension loosen the hex
The spring tension is factory set at the lowest (softest)
position.
DRIVING POSITION
The driving position height can be adjusted to change the
balance (feel) of the transmitter in your hand.
height position.
of the transmitter using a 3mm hex wrench.
unit. Be careful to avoid damaging the lead wires that
are connected on both units.
3) There are four phillips head screws holding each side
4) After resetting the driving position, retighten the grip
THROTTLE TRIGGER TENSION
The throttle trigger spring tension can be adjusted to suit
your taste.
The spring tension is factory set at the lowest (softest)
position.
of the transmitter using a 3mm hex wrench.
unit. Be careful to avoid damaging the lead wires that
are connected on both units.
mm hex wrench as shown at right. To increase throttle
trigger spring tension tighten the hex screw (turn
4) After resetting the throttle trigger spring tension, align
the upper transmitter unit and reinstall it using the two
Page 4