AU Xperia XL2 SOL25 Grundlegendes Handbuch

Blättern Sie online oder laden Sie pdf Grundlegendes Handbuch für Mobiltelefon AU Xperia XL2 SOL25 herunter. AU Xperia XL2 SOL25 2 Seiten.

Seite drucken

Preface

Thank you for buying "Xperia

"product" from here on).

Before using the product, read "Basic Manual" (this manual)

and "

(Japanese) to ensure safe use and handling.

About Operating Instructions

Basic Manual (this manual)

Handles only basic operations for main features.

SOL25

For detailed descriptions on various functions, refer to the

"Instruction Manual" (Japanese) application installed on the

product or "

(Japanese)" available on the au homepage.

http://www.au.kddi.com/support/mobile/guide/manual/

Company names and product names referred to in this

manual are trademarks or registered trademarks of

respective companies. The TM, ® marks may be omitted in

this manual.

"Instruction Manual" (Japanese) application

This product allows you to use the "Instruction Manual"

(Japanese) application on the product to confirm detailed

operational procedures.

Certain functions can be directly activated from the

application screens on which their operations are described.

From the Home screen, [

(Customer support)] [Basic Manual] (Japanese)

When you activate for the first time, follow the onscreen

instructions to download and install application.

❖Information

m Camera lens

n Flash/Photo light

Purchase a specified charger (sold separately).

o GPS/Built-in antenna

Illustrations used in this manual are just images for explanations.

p Bluetooth

They may be different from actual ones.

/Wi-Fi

antenna part

q Back cover

Getting Ready

r NFC (FeliCa

compatible) antenna

Names and functions of parts

mark

t Nameplate

a Second microphone

u au Micro IC Card (LTE)

Reduces noise to make

v Built-in antenna

easy to listen.

w microUSB connection

b Headset connection terminal

c Front camera

terminal

x Desktop Holder

d Earpiece/Notification

contact terminal

LED/Speaker

y microSD memory card/au Micro IC Card (LTE) slot

e Proximity sensor:

*1 Do not jab with a sharp object such as a needle. Doing so may

Switches touch panel on

and off to prevent from

cause a fault.

*2 The antenna is built in. Covering around the antenna by the

erroneous operation

during a call/Auto-control

hand may affect the quality of call/communication.

for display brightness

*3 Back cover is not removable. Removing so forcibly might cause

f Display (Touch panel)

damage or a fault. Also, battery is built into the main unit and

g Speaker

not removable by customers.

h Power key/Screen lock

*4 Do not remove the nameplate with stickers of CE mark, FCC ID

key:P

and IMEI information printed.

i Volume key/Zoom key

au Micro IC Card (LTE)

j Camera key: k

k Strap hole

Your phone number etc. is recorded in the au Micro IC Card (LTE).

l Microphone/speaker

When charging is complete, lift the product to remove

Common AC adapter 05

while pressing the Desktop Holder

Notification

(sold separately)

LED

Remove the Common AC Adapter 05 (sold separately)

from the outlet

AC 100V

Charging with the AC Adapter

outlet

Charging with Common AC Adapter 05 (sold separately) is

microUSB connection

explained.

terminal

Notification

LED

Magnetic

Connector

Desktop Holder

microUSB plug

Groove

Insert the microUSB plug of Common AC Adapter 05 (sold

separately), with the engraved side ( ) facing up, straight

into the microUSB connection terminal of the Desktop Holder

Insert the power plug of Common AC Adapter 05 (sold

separately) into an outlet

microUSB plug

Install the product to the Desktop Holder and move it

Common AC adapter 05

left or right until it clicks

(sold separately)

When the product and the magnetic connector of the

Desktop Holder are connected correctly, the notification

Open the microUSB connection terminal cover of the

LED of the product turns on.

product while hooking the groove with your fingernail, and

insert the microUSB plug of Common AC Adapter 05 (sold

separately), with the engraved side (

into the microUSB connection terminal of the product

Insert the power plug of Common AC Adapter 05 (sold

separately) into an outlet

Notification LED lights on the product.

For Those Requiring an English Instruction Manual

You can download the English version of the Basic Manual

ZL2" (simply called the

from the au homepage (available in approximately one month

after the product is released).

Download URL:

(Full Instruction Manual)"

http://www.au.kddi.com/support/mobile/guide/manual/

Safety Precautions

Before you start using the product, make sure to read the

"Cautions on using Xperia

ZL2" to ensure correct use.

Before you assume that the product is malfunctioning, check

for possible remedies in the following au Customer Support

site of au homepage:

http://www.au.kddi.com/support/mobile/trouble/repair

(Full Instruction Manual)

Regarding notations used in this document

In this manual, keys (key icons) are represented by

simplified illustrations such as x, y, r, P, k.

Operations of tapping menu items/icons/buttons on the

screen etc. are indicated as [(name of the item etc.)].

Screen illustrations shown in this manual may look different

from the actual screens. In some cases, minor details or a

part of a screen may be omitted.

In this manual, "microSD

memory card", "microSDHC

memory card" and "microSDXC

memory card" are

abbreviated as "microSD memory card" or "microSD".

All of the indicated amounts exclude tax unless otherwise

] [

specified.

The product is compatible only

n o

au Micro IC Card (LTE)

with au Micro IC Card (LTE). You

IC (metal) part

cannot use the product with an au

IC-card or micro au IC card

switched from an au cell phone or

au smartphone.

Do not insert an au Nano IC Card

Front

(LTE) with a conversion adapter.

Doing so may cause a fault.

Attaching/removing the au Micro IC Card (LTE)

Before attaching/removing the au Micro IC Card (LTE), make

sure to turn off the product.

Attaching the au Micro IC Card (LTE)

Open the microSD memory card/au Micro IC Card (LTE)

slot cover while hooking the groove with your fingernail

Hook the projection of the tray (

) with your fingernail

to slide the tray straight out, then remove the tray from

the product

Tray

When charging is complete, remove the microUSB plug of

Common AC Adapter 05 (sold separately) from the product

and close the microUSB connection terminal cover firmly

Remove Common AC Adapter 05 (sold separately) from

the outlet

Charging with the DC Adapter

You can charge from cigarette lighter socket in a car by using

Common DC Adapter 03 (sold separately). For details, refer to

instruction manual of Common DC Adapter 03 (sold

separately).

Charging with a PC

The followings describe charging procedure by connecting

the product to chargeable USB port on a PC using the

microUSB cable of Sony Mobile AC adapter 05 (sold

separately).

Open the microUSB connection terminal cover of the

product while hooking the groove with your fingernail,

and insert the microUSB plug of the microUSB cable,

AC 100V

with the engraved side (

) facing up, straight into the

outlet

microUSB connection terminal of the product

Insert the USB plug of the microUSB cable into the USB

port of a PC

Notification LED lights on the product.

When a screen for installation of software or a screen for

new hardware detection appears, skip or cancel it.

) facing up, straight

When charging is complete, remove the microUSB plug

of the microUSB cable from the product and close the

microUSB connection terminal cover firmly

"The Company" as appears on the product refers to the

When you receive Earthquake Early Warning, ensure your

following companies:

safety and take proper action according to the situation

Sold by: KDDI CORPORATION, OKINAWA CELLULAR

around you. When you receive a Tsunami Warning, draw away

TELEPHONE COMPANY

from sea coast immediately and evacuate to safe place such

Manufactured by: Sony Mobile Communications Inc.

as upland or well-built high building.

Using au

(au Disaster Countermeasure)

You can use

(Disaster Message Board) service,

❖Information

(Emergency Rapid Mail) service that distributes

(Earthquake Early Warning),

(Disaster

Reception of Emergency Rapid Mail is notified by a special warning

and Evacuation Information) and

(Tsunami Warning), and

tone and vibration. It is not possible to change the warning tone.

(Disaster Voice Messaging Service).

*Earthquake Early Warning is notified by warning tone and voice

sound ("

From the Home screen, [au

(au Disaster

Earthquake Early Warning may not arrive before strong

Countermeasure)]

tremors in areas near the epicenter.

(au Disaster Countermeasure) menu appears.

Tsunami Warning is a major tidal wave/seismic sea wave

Using

(Disaster Message Board)

notification delivered from the meteorological bureau to the

Disaster Message Board service enables you to register information of

area including target coast.

well-being from an area of distress via LTE NET in case of large-scale

Disaster and Evacuation Information is a service that

disaster such as earthquake with a seismic intensity of over 6 lower.

distributes bulletins concerning residents' safety including

evacuation advisories, evacuation orders and other

(au Disaster Countermeasure) menu [

warnings issued by the national and local governments.

(Disaster Message Board)]

The service is available only in Japan (it cannot be used overseas).

❖Information

No information fee or communication charge is required for

To register information of well-being, E-mail address

receiving Emergency Rapid Mail.

(

ezweb.ne.jp) is required. Set up E-mail address beforehand.

KDDI is not liable for damages suffered by customers

resulting from the service's information, lack or delay in the

Using

(Emergency Rapid Mail)

information caused by transmission or system breakdowns,

Emergency Rapid Mail is a service that distributes Earthquake

or other events that are outside the responsibility of KDDI.

Early Warning or Tsunami Warning delivered from the

Refer to the Japan Meteorological Agency web page for details

meteorological bureau or Disaster and Evacuation Information

about distribution of Earthquake Early Warning.

delivered from the government or local public organization to all

http://www.jma.go.jp/

au cell phones in specified areas simultaneously.

Set au Micro IC Card (LTE) into the tray with IC (metal)

Close the microSD memory card/au Micro IC Card (LTE)

part facing up (

), insert the tray with the card into the

slot cover, press it firmly to ensure that there are no

main unit and press it all the way

gaps between the cover and the main unit

Pay attention to the orientation of the notch and pressing tray.

❖Information

Note the following points, otherwise handling the au Micro

IC Card (LTE) may cause malfunction or damage.

Back

Do not touch the IC (metal) part of the au Micro IC Card (LTE).

Insert in the correct direction.

Do not use force to attach or remove.

Do not lose the au Micro IC Card (LTE) after it has been

removed.

Attaching/Removing microSD memory card

Notch

Attaching microSD memory card

Tray

Open the microSD memory card/au Micro IC Card (LTE)

slot cover while hooking the groove with your fingernail.

Close the microSD memory card/au Micro IC Card (LTE)

Check the orientation for inserting, and insert it until it

slot cover, press it firmly to ensure that there are no

clicks

gaps between the cover and the main unit

Insert the microSD memory card with the contact side down.

Removing au Micro IC Card (LTE)

Open the cover while hooking the groove of microSD

memory card/au Micro IC Card (LTE) slot cover with

your fingernail

Hook the projection of the tray with your fingernail to

slide the tray straight out, then remove the tray from the

main unit

Remove au Micro IC Card (LTE) out of the tray, insert

the tray into the main unit and then press it all the way

Pay attention to the direction of pushing the tray.

Remove the USB plug of the microUSB cable from the

USB port of the PC

Turning on (Initial settings)

Turning the power on

P (over 1 sec)

The product vibrates and after a while the lock screen

appears.

When you turn on the product for the first time, follow the

onscreen instructions to set the initial settings.

Swipe (flick) the screen up or down

Turning the power off

❖Information

P (over 1 sec)

Pressing the OFF button (RED) by a sharp object such as

needle may cause malfunction.

[Power off] [OK]

Alternatively, press and hold P and upper part of the

❖Information

volume key at the same time for approximately three

Press P for over 1 second and long-touch "Power off"

seconds, and release your finger after it vibrates three times.

[OK] to restart product in safe mode.

Initial settings

Force-quitting

When you turn on the product for the first time, follow the

Open the microSD memory card/au Micro IC Card (LTE)

onscreen instructions to set language, functions, service, etc.

slot cover while hooking the groove with your fingernail,

For details, refer to "Setting Guide".

press the OFF button (RED) with a fine-tipped object for

❖Information

approximately three seconds, and release your finger after

To change the language later, from the Home screen, [

it vibrates three times

[

screen, [

You cannot receive Emergency Rapid Mail when your cell

phone is turned off or during a call.

Emergency Rapid Mail may not be received when your cell

phone is communicating such as while sending/receiving

SMS/e-mail or using the browser, or if you are in a place where

signal does not reach even in the service area (e.g. in a

(au Disaster Countermeasure) menu [

tunnel, basement) or in a place with a poor reception.

(Emergency Rapid Mail)]

You cannot receive the Emergency Rapid Mail that the

reception is failed.

This delivery system is different from Earthquake Early

Warning provided through TV, radio, or other communication

procedures, which means that the time the Earthquake Early

Warning arrives may vary.

" (It is an earthquake)), and vibration.

Information from someplace other than your current location

may be received.

Using

Messaging Service)

Disaster Voice Messaging Service is a service which allows

you to record your voice and send someone you want to

inform your well-being in case of a large-scale disaster.

(au Disaster Countermeasure) menu [

(Disaster Voice Messaging Service)]

❖Information

To use Wi-Fi

, initial settings via 4G (LTE/WiMAX 2+)/3G

network is required.

Voice message can be recorded for up to 30 seconds.

Voice messages cannot be saved or played if the product

does not have available memory.

Close the microSD memory card/au Micro IC Card (LTE)

slot cover, press it firmly to ensure that there are no

gaps between the cover and the main unit

❖Information

Insert a microSD memory card in the appropriate direction.

Inserting a microSD memory card forcefully into the slot

could result in failure to remove the microSD memory card

or damage.

Do not touch the terminal of the microSD memory card.

Removing microSD memory card

Be sure to unmount microSD memory card before removing.

From the Home screen, [

[Unmount SD card]

[OK]

When it is unmounted, "

SD card safe to remove"

appears on the status bar to notify you that reading and

writing from/to the microSD memory card are disabled.

Open the microSD memory card/au Micro IC Card (LTE)

slot cover while hooking the groove with your finger

Press the microSD memory card all the way until it

clicks, then pull out the microSD memory card slowly

Removed SD card" appears on status bar to inform that

the microSD memory card is removed.

Close the microSD memory card/au Micro IC Card (LTE)

slot cover, press it firmly to ensure that there are no

gaps between the cover and the main unit

microSD memory card

for au service etc., from the Home screen, [

(Customer support)] [au Easy Setting].

Screen Lock

When the screen lock is set, the backlight turns off to avoid

the keys and touch panel from false operations.

When the specified time elapses, the product's screen

backlight turns off automatically and screen lock is activated.

While the screen is displayed, P

Unlocking screen

The lock screen appears when turning the power on or the

backlight on by pressing P.

Swipe (flick) the screen up or down on the lock screen

❖Information

On the lock screen, long-touch "

activate the camera.

Basic Operation

Key icons

The followings are the main functions of x, y, r

keys located at the bottom of the screen.

]

(Settings)] [

(Language & input)] [

(Language)]. To make settings, from the Home

] [Settings] [Setup guide]. To make settings

Using

(Disaster

information/Donation website)

You can check history of Disaster and Evacuation Information

delivered by local government, disaster information portal,

donation website, etc.

(au Disaster Countermeasure) menu [

(Disaster information/Donation

website)] Follow the onscreen instructions

Do you have everything?

Before your start using the product, make sure that you have

all the following packaged with the product.

Xperia

ZL2

Desktop Holder (SOL25PUA)

(Disaster Voice

Sony Mobile TV antenna cable 02

02SOHSA

*1 Including warranty

(Instruction Manual) (Japanese)

Xperia

ZL2

(Cautions on using

Xperia

ZL2) (Japanese)

(Setting Guide) (Japanese)

The following items are not included in the package.

microSD memory card

AC adapter

Earphones

microUSB cable

Charging

When you purchase your product, the internal battery is not

fully charged. Charge the battery before use.

❖Information

When the charging starts, notification LED lights according to

the battery level. To check the battery level, see the status bar in

the top of the Home screen. Alternatively, from the Home screen,

[

] [Settings] [About phone] [Status] and see "Battery

level".

When you start charging with the product powered off, the

power turns on even though operation is not available. Do not

]

[Settings]

[Storage]

charge the battery in a place where the use is prohibited such

as in airplane or hospital.

It may take longer to complete for charging with a PC or

while using the camera function.

You cannot charge the battery by connecting the Desktop

Holder to a PC.

Be sure to attach the supplied attachment to the Desktop

holder when charging. If the product is installed without the

attachment attached, charging fails.

Replace the attachment as required. Depending on cover

you use, charging may fail.

Charging with the Desktop Holder

Charging with the supplied Desktop Holder (SOL25PUA) and

Common AC Adapter 05 (sold separately) is explained.

] [

Return to the previous screen. Close a dialog

Back

box, menu, or the Notifications panel.

Display the Home screen.

Home

Long-touch and drag it to "

" to activate

"Google" application or drag it to "

" to

activate "What's New" application.

Display recently used applications on a list and

Recently

activate or delete them from the list. Also, you

used

can use and set small apps.

applications

Using the touch panel

The display of the product is a touch panel operated by

touching it with your finger.

" and drag it to "

" to

Tap/Double-tap

Tap: Gently touch a screen and then immediately release your

finger. Double tap: Touch the same position twice.

Long-touch

Keep touching an item with your finger.

Slide

While your finger is gently touching the screen, trace it to the

desired direction to move over.

Flick (swipe)

Operate the screen by quickly moving (flicking) your finger

up, down, right, or left.