Auber Instruments WS-1500EB Betriebs- und Gebrauchsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Betriebs- und Gebrauchsanleitung für Temperaturregler Auber Instruments WS-1500EB herunter. Auber Instruments WS-1500EB 18 Seiten. Precision pid temperature controller
Seite drucken
Plug the temperature sensor to the back of the controller.
Plug the power cord to the power outlet on the wall.
Turn on the controller to make sure the controller powers up properly, and the
temperature display is in the range expected. Then, turn off the controller.
Plug the heater to the back of the controller. If the heater has a switch, put it in the
off position. Put the sensor inside the container to be controlled.
Turn on the controller.
Turn on the heating device.
Remark The connector of sensor contains a slot for correct pin connection. It also has a
spring lock to prevent disconnections from accidental pulling on the cable. The following
pictures show how to install and remove it.
Figure 4. How to install the sensor.
5