Abstract Data ADE-32 OCTOCONTROLLER Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikanlagen Abstract Data ADE-32 OCTOCONTROLLER herunter. Abstract Data ADE-32 OCTOCONTROLLER 18 Seiten. Control, modulation, triggering and pattern module with 12 output types individually assignable to 8 simultaneous outputs.
Auch für Abstract Data ADE-32 OCTOCONTROLLER: Benutzerhandbuch (11 seiten)
Seite drucken
5) Outputs & Inputs
1) OUT: 1-8
The ADE-32 has 8 outputs aligned vertically down the right-hand side of the front panel.
Any of the 12 output types can be assigned to any of the 8 outputs.
To the right of each output are 2 indicator LEDs – a blue LED marked 'E' (Edit) to show which of the
8 outputs is currently selected for editing according to the position of the OUTPUT: SELECT knob
and a white LED marked 'A' (Activity) to show what is happening at that output.
2) EXT. CLOCK IN
The ADE-32 can be operated using its on-board clock or can be synced/slaved to an external clock.
Under the latest firmware revision it is possible to select whether the ADE-32 is controlled by the
internal or an external clock.
When controlled by an external clock – the ADE-32 will not run until it receives a clock signal.
When running under the internal clock – the ADE-32 can be started and stopped manually via
the front panel.
The ADE-32 will sync to the rising edge of an incoming signal between 20 and 270 BPM as long as
the incoming clock is set to the correct resolution and within the module's tempo range.
Under the latest firmware revision the ADE-32 will sync to external clock resolutions of 1, 4 or 24 PPQN.
1 BAR : 4 BEATS
1
1 PPQ : 1/4 NOTES
1
4 PPQ : 1/16 NOTES : 1 STEP
1.1
24 PPQ
1.1 1.2 1.3 1.4
3) EXT. RESET IN
The ADE-32 can be reset using the rising edge of an external input signal.
This will reset the cycle of all 8 outputs back to bar 1, beat 1 of the overall 16 bar, 64 beat cycle.
© 2016 Abstract Data Ltd.
2
2
1.2
1.3
1.4
2.1
2.2
1.5 1.6
2.1
2.2 2.3 2.4 2.5 2.6
3
3
2.3
2.4
3.1
3.2
3.3
3.1
3.2 3.3 3.4 3.5 3.6
4
4
3.4
4.1
4.2
4.3
4.4
4.1
4.2 4.3 4.4 4.5 4.6
Page 5 of 15
Version 1.1.3