Aucma YBW60-100A10 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Herde Aucma YBW60-100A10 herunter. Aucma YBW60-100A10 6 Seiten. Fully automatic electric pressure cooker

Seite drucken

5. Close the lid. Before closing, please check the gallbladder has been already put inside of the

lid and also rotate slightly the gallbladder support cover with hand to make sure it is evenly put

on the lid. Then take hold of the handle and turn the lid anti-clockwise to close the lid until you

hear "click"

6. Put the exhaust valve on the full sealed position, and check if the float valve has been down or

not. (see picture 10.11)

(Picture10)

7.Switch on the power，it will show"0000"

8.Set the parameter and start heating.

set the preset time, ( if you don't want to preset the time in advance,

so this step is needless ),

press"timer "button , and this button will be on light ,means add 0.5 hour each time. You can

repeat this setting by pressing this button. Longest time you can preset is 24 hours

(after presetting the time, then it begins heating).

please select the menu according to the food you want to cook.

a.Choosing the menu on the control panel, if you want to cook rice, pls press"rice"button. Then

the machine will strat to work.

b.If you want to choose "optional pressure time"，please refer to the cooking

guide( see picture 12 ). Press"optional pressure time"button, then press this button again,

it will add the pressure-keeping time by 1 minute. Repeating press this button. (Prcssurc-

keeping time refers to the time it keeps when the food inside comes up to the working

pressure during heating)

If the function of timer is preset, and the timing light is on, so the LCD display decreases

the time by minute , and when it comes to"0", the light is off ，and it begins to heat.

When the ptrssure comes up to the working pressure during heating, and entets into the pressure-

keeping procedures，

a. the LCD shows "P:00" ( "00"is the time which is set for keeping pressurc ), and time fo r

pressure-keeping reduces by minute.

b. If you choose "optional pressure time"button, the display will show"P:00" ("00"is the

time which is set for keeping pressure, if you set the time as 15 minutes, so the display

shows "P:15" ), and time for pressure-keeping reduces by minute.

Please refer to"COOKINGGUIDE"for details. ( see Picture 12) The display shows"0000"

when it finishes the process of pressure keeping, and it rings 3 times. it will enter into

warm-keeping state when finish cooking.

You can cancel the functions you set by pressing the"Cancel warmth" button in the course of

cooking or function setting.

(Picture11)

- 4 -

You can cencel the function of keeping warm by pressing "Cancel warmth", without the

state of working or function sett ng.

9.Open the lid and take out of the food.When the warm-keeping light is on, then you can take

out of the food. The ways as following:pressing" Cancel warmth"and come out of warmin

state. Then please move the pressure limitation valve to the position of exhausting, until the

float valve is down

1 0-20

3-8

mi nu te

(Picture12)

(Picture13)

*When cooking the spoon meat (porridge , viscous pill), it should be cooled down naturally

until the float valve is down , then can release the air . Also the wet towel can be put on the

lid to accelerate the cooling .

*Users can adjust the time suitably in accordance with food ,personal preference and

cooking experience.

*When finish cooking the soup and porridge , the float valve is down and then it is ready to

be opened . The soup and porridge will be more delicious if you keep them heating up and

boiling for 3-5 minutes with the lid open .

Clean and Maintenance

1.Before cleaning , please switch off the power

2.Then take out the inner pan and lid , and firstly use the household detergent for cleaning, and

then use clean water , at last use the dry cloth to wipe out the water .

13-2 0

15 -2 5

20 -3 5

m inu te

m in ut e

m i nu te

(Picture14)

- 5 -