AIRTRONICS Blazer Sport Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Kontrollsysteme AIRTRONICS Blazer Sport herunter. AIRTRONICS Blazer Sport 2 Seiten.

Seite drucken

We appreciate your purchase of this new

Please note that the Blazer Sport is designed

AIRTRONICS Blazer Sport Radio Control

for comfort and precise control of all types of

System. These instructions are intended

model cars and boats. We wish you the best

to familiarize you with the many unique

of success with your radio system.

features of this modern, state of the art

Enjoy!

equipment.

Please read them carefully so you may

obtain maximum success and enjoyment

from its operation.

SYSTEM FEATURES

Unique and functional pistol grip-

Servo reversing for easy installation

transmitter design

(70/30) Throttle trigger

Well balanced for precise control

Quick access transmitter crystal.

Well placed trim and rate functions

Lightweight, high performance mini receiver

High power output

Receiver includes BEC (Battery Eliminator Circuit)

Color LED power indicators for easy reference

which allows the use of a common power supply for

of battery condition

the model and receiver

Retractable transmitter antenna

High torque and high speed 94102Z servo

Receiver dry battery holder

NiCd Charger Jack in transmitter

SYSTEM SPECIFICATIONS

(A) Transmitter

Model:

Blazer Sport

Model:

Output power:

500 MW

Power supply:

Modulation:

AM/PPM

Dimensions:

Power supply:

8 AA alkaline dry cells DC 12V

Weight:

14.46 ounces

Speed:

Frequencies:

27 Mhz- 6 frequencies

Torque:

75 MHz-30 frequencies

Operating Voltage 4.8~6.0

(D) Accessories

(B) Receiver (Mini BEC type)

97004 BEC switch harness

Model:

92721Z (27 Mhz) or

Frequency flag

92723Z (75 MHz)

Receiver dry battery holder

Modulation:

AM/PPM

Instruction Manual

Intermediate frequency: 455 KHz

Power supply:

DC 6.0-8.4 V

Weight:

1.13 ounces

(E) Options

Dimensions:

1.9"(L) x 1.3"(W) x .75"(H)

96315

96720

99104

96305Z BL-Racer Speed Controller with reverse

96316Z F-2000 Speed Controller with reverse

96301Z ES-01 Micro Speed Controller with reverse

TRANSMITTER FUNCTIONS AND OPERATIONS

Antenna

Pull antenna up until it is fully extended before operating the system.

Failure to do so can cause loss of control

Transmitter crystal

The transmitter crystal can be

removed to change frequencies.

Use only genuine

AIRTRONICS crystals to insure

proper operation.

Power swicth

The power switch slides up to turn on

the transmitter.

When operating your model always

turn on the transmitter before the

receiver. This will prevent the model

from accidentally running away.

NiCd Charger Jack

Only to be used when NiCd batteries

are installed.

Wrist Band Hook

Attachment point for the optional 99104

Deluxe Wrist Strap.

94102Z Heavy duty standard servo

6.0 V throught BEC receiver

1.54"(L) x .79"(W) x 1.42"(H)

Battery Cover

1.59 ounces

Slide battery cover open as indicated on

0.18 sec. at 6.0V for 60 deg rotation

battery cover. Install batteries as indicated

50 oz./inches:

on battery tray.

Contender speed controller with reverse

Grip Pad

Deluxe wrist strap

Steering Dual Rate

Steering dual rate is used to change

steering Sensitivity

(Note) Dual Rate option not

THE CHOICE OF CHAMPIONS

ST-TRIM

AIRTRONICS

LOW

FULL

TM-TRIM

Steering Wheel

Turn clockwise to make the model

turn right. Turn counter clockwise to

make the model turn left.

ADVANCED TECHNOLOGY FOR NEW GENERATION

TM-TRIM

Throttle Trigger

Pull back for forward throttle.

Push forward for reverse

throttle/brake.

Forward

Reverse

LED Power Indicators

These color indicators will give you a visual reference for

the condition of the transmitter batteries.

Full

Mid

on some models

Low

Steering Trim

Is used to adjust the neutral point for

steering operation.

Reverse Switches

In most models, you can leave

these switches in the nor or normal

position.

When the direction of the steering or

throttle movement is opposite from

the direction of steering wheel or

trigger movement, move the switch

to the rev or reverse position. This

will reverse the direction of the servo

movement and allow you to operate

the model in the normal fashion.

Throttle Trim

Is used to adjust the neutral point for

throttle / brake operation.

All three indicators (2 green and 1 red) will

Green

be lit when the power is on and the

Green

Red

batteries are in their best condition.

Two indicators (1 green and 1 red) will be

lit when the power is on and the batteries

Green

are losing capacity. Use caution when

Red

operating you model, and replace the

batteries as soon as possible.

One indicator (red) will be lit when the power

is on and the batteries are dead or to weak to

power the transmitter. DO NOT attempt to

Red

operate your model, and replace the batteries

immediately. If the batteries are improperly

installed, the LED indicators will not be lit.

Check your battery installation and/or

individual batteries. DO NOT mix old and new

batteries