2bfirst Battwatch 2000 Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Zubehör für Kraftfahrzeuge 2bfirst Battwatch 2000 herunter. 2bfirst Battwatch 2000 20 Seiten. The ultimate car power supply monitoring system

Dear customer:
W
e thank you for purchasing the B
and for your trust in our product.
attwatch
Please read these operating instructions carefully, since they contain important information for the application
and especially for your safety.
NOTE:
The illustrations referred to in these operating instructions are listed on the interior pages of the jacket.
INFORMATION FOR USERS OF THE MODEL B
1000:
attwatch
These operating instructions depict the model B
2000 for illustration purposes. In contrast to the model
attwatch
B
1000, the model B
2000 additionally has an LED display that indicates the voltage or the
attwatch
attwatch
interior temperature; otherwise the technology of both models is identical (also see the explanations in chapter
3 on this subject).
1. Introduction and functionality
For a better understanding of the B
performance features, here is a short, simplified presentation of the
attwatch
functionality of the vehicle's energy system and battery charging system:
The generator is powered by the engine through a fan belt and thereby generates a voltage that is speed depen-
dent. The voltage produced by the generator supplies the battery and the electricity consumers in the vehicle
with energy (e.g. control devices, lighting, air conditioning). To prevent an overload of the battery at high engine
speeds, a regulator is installed to regulate voltages above approx. 15 volts.
Therefore – in simplified form – the vehicle's entire energy system comprises the following components:
● Generator
● Fan belt
● Battery
● Regulator
● Connections
● Cabling
All of these components are constantly monitored by B
. The B
registers every change and
attwatch
attwatch
analyzes whether the system is functioning flawlessly. B
communicates the diagnoses resulting from the
attwatch
analysis to the user by means of different, function-specific illuminated displays and in critical cases, it also uses
an alarm signal to alert the user that a part of the system is defective and has to be replaced or repaired. In this
way the B
informs the driver in time before a breakdown that the battery or the energy system should
attwatch
be checked at a car repair shop as soon as possible. At the same time the B
provides detailed, practical
attwatch
information about the source of the flaw and thus reduces a time and cost intensive search for the origin.
While monitoring the entire vehicle energy system, the B
monitors the current battery level not only
attwatch
through the applied voltage but uses an innovative technology that has been patented worldwide – the „deter-
mination of the discharge curve" to display the actual battery level. Therefore the B
can also determine,
attwatch
for example, whether the individual battery cells are functional or not. With a so-called virtual voltage diagram,
where a traditional voltage meter would continue to display the voltage level as "normal", the B
can also
attwatch
recognize whether battery cells are already oxidized. Because in such an event this battery would no longer be
strong enough to start the vehicle.
The illuminated displays of the B
provide the driver with clear information about the condition and
attwatch
possible sources of flaws of the vehicle's energy system. The different displays are explained in the chapters 4
to 7 below in detail.

2. Installation

The installation of the B
is very simple: Connect the plug of the B
directly to the cigarette lighter
attwatch
attwatch
of your car – and the B
is already operational and can now monitor the entire energy system of the
attwatch
vehicle.
There are two possibilities of attaching the B
to your vehicle. You can either attach the B
directly
attwatch
attwatch
to a suitable place on the dashboard of your car with the provided double-sided adhesive tape or you can
alternatively install it on the dashboard with the holder included in the package (illustr. 1) in just a few steps.
Here the B
is attached at the upper rectangular surface with the enclosed double-sided adhesive tape.
attwatch
Then the oval bottom plate is affixed to a suitable spot on the dashboard, also with the enclosed adhesive tape.
3