Conair PerfectFit HH400C Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Haartrockner Conair PerfectFit HH400C herunter. Conair PerfectFit HH400C 8 Seiten. Collapsible bonnet dryer

Seite drucken

arm that allow you to raise the bonnet to the

height that is most convenient for you. If you

prefer less than the full height, you do not have to

Fig. 2

extend the arm fully and can lock the arm in at the

first or second detent.) (See Fig. 2) Once arm is

extended, tilt the bonnet slightly to engage the

latch at top of the arm. Now rotate the outer part

of the bonnet downward until you hear it lock.

(See Fig. 3) Your dryer is ready for use!

Be sure the power switch is in the "off" position.

Plug cord into a 120 volt electrical outlet. Switch

to either high or low setting.

TEMPERATURE SETTINGS:

The high heat and high speed setting is rated at

1875 watts and is useful for drying very wet hair.

The low heat and low speed setting, which is rated

at 900 watts, is a gentle setting. The high setting

can be switched to low as your hair dries. The low

setting is also good for safely drying natural

and synthetic hair pieces.

TO CLOSE:

Fig. 3

Let your dryer cool down after use. Then rotate the

lower portion of the bonnet dryer back up into its

storage position, until you can hear it lock. (See

Fig. 4) Now grab the built-in handle in the bonnet

and tilt the bonnet backward a little. Release the

inner latch on the arm by pushing down on on the

latch bar. (CAUTION: Make sure latch has been

released before trying to collapse arm and lid, to

prevent damage to your bonnet dryer.) (See Fig. 5)

Collapse the arm and lid onto the base by gently

pushing downward. Rotate the side latches back

into their locked position. You can now carefully

insert the cord back into the base until all of the

cord has been stored.

Fig. 4

Fig. 5