Conair 20-piece HC200WXCSC Anweisungen für Pflege und Gebrauch - Seite 3
Blättern Sie online oder laden Sie pdf Anweisungen für Pflege und Gebrauch für Elektrischer Rasierer Conair 20-piece HC200WXCSC herunter. Conair 20-piece HC200WXCSC 17 Seiten. Haircut kit
Seite drucken
WARNING-
To reduce the risk of
burns, electric shock, fire, or injury to persons:
1. This appliance should never be left unattended when
plugged in. Do not pull, twist, or wrap line cord
around appliance.
2. Close supervision is necessary when this
appliance
is
used
by,
on,
or
near
children or invalids.
3. Use this appliance only for its intended purpose
as described in this manual.
Do not use
attachments
not
recommended
by
the
manufacturer.
Do
not
use
an
extension cord to operate this appliance.
4. Never operate this appliance if it has a
damaged cord or plug, or if it is not working properly,
if
it
has
been
dropped
or
damaged, or dropped into water. Return the appliance
to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening
on this appliance.
7. Do not place appliance on any surface while it is
operating.
8.
Do
not
use
this
appliance
with
a
damaged or broken comb or with teeth
missing from the blades as injury may occur. Before
use, make certain blades are aligned properly.
(See "Care of your Clippers")
9. Do not use outdoors or operate where aerosol
(spray) products are being used or where oxygen is
being administered.
10. Never operate the appliance with the air openings
blocks or while on a soft surface, such as
a
bed
or
couch,
where
the
air
openings may be blocked. Keep the air
openings free of lint, hair, and the like.
11. Always attach plug to appliance first, then to
outlet. To disconnect, turn all controls to "OFF" then
remove plug from outlet.
12. Avoid skin contact with moving blades.
13. When using the appliance with its cord, be
mindful of tangles or kinks in the cord. If the cord
does become tangled during use, turn the unit off and
straighten cord before operating again.