2bfirst Cadillock Alarm Installations- und Betriebsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Autoalarm 2bfirst Cadillock Alarm herunter. 2bfirst Cadillock Alarm 20 Seiten.

Seite drucken

navigation systems that also receive messages when the ignition is

switched off. In individual cases, this may result in an activation of

the voltage sensor and therefore the Cadillock

Alarm and this may

lead to the alarm being sounded. In this case the voltage sensor

should be set to the lowest sensitivity level. In all other cases, we

recommend the factory setting on the medium sensitivity level.

Automatic lock mode

Automatic lock ON

Press the buttons

and

simultaneously and the confirmation

tone will sound three times to notify you that the Cadillock

Alarm

has changed to the "automatic lock" mode.

Automatic lock OFF

Press the buttons

and

simultaneously and a confirmation tone

will sound five times to notify you that the Cadillock

Alarm has

returned to the "manual lock" mode.

If the mute setting mode was activated by pressing the button

this setting is considered when the function "automatic lock" is acti-

vated.

PLEASE OBSERVE:

Do not try to start the engine when the Cadillock

Alarm is activat-

ed, since this may lead to data loss, e.g. by the board computer, or

to error messages from individual control devices. If you would like

to start the engine for test purposes after the activation of the

Cadillock

Alarm, you will have to reset the lost data afterwards

(clock, radio, board computer, etc.) and in the case of a few new

vehicle models, you may also have to manually correct an error

message yourself or have it corrected by a specialized repair shop.