Conair Weight Watchers Gebrauchsanweisung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Skalen Conair Weight Watchers herunter. Conair Weight Watchers 6 Seiten. Bathroom scale
Auch für Conair Weight Watchers: Anweisungen (3 seiten), Gebrauchsanweisung (2 seiten), Gebrauchsanweisung Handbuch (11 seiten)
Seite drucken
Customizing Your Body Analysis Monitor
This scale can be customized for up to 4 users. While the customization process is
not difficult, it may be easiest to read all the instructions first to familiarize yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: USER, SET, Up and Down arrows
1. To set your user data
Tap the scale to turn it on and wait until "0.0" appears.
2. Setting the user number
Press the "Set "button. The number "P-01" will appear and blink. Use the Up/Down
button to select a user number (P-01 to P-4). Press SET to confirm.
3. Setting the height
Next, the inch or cm symbol light up (if switch is set to lb, default is height in inches;
if switch is set to KG, default is height in cm). Press the up or down arrows to adjust
the height. Pressing and holding either the up or the down arrow will advance
numbers quickly. Press SET to accept the height. Scale enters the age setting mode.
4. Setting the age
"AGE" appears and the default age 25 flashes. Press the up or down arrows to
adjust the age and press SET to confirm. The scale enters the gender setting mode.
5. Setting the gender
A gender icon flashes. Press the up or down arrows to choose between male and
female gender.
6. Displaying and storing data
Once gender is set, data storage is complete. Scale will display your stored data:
User number, Height and Age will each show for a few seconds.
7. The scale will turn off automatically. It is now ready for use.
Body Analysis
1. Operate the scale on a secure flat floor. Tap the scale to turn it on, and wait till
"0.0" appears. Press the "User" button repeatedly until your user number shows on
the display.
2. Stored data for your user number appears (User number, Height, and Age) then
the scale displays "0.0".
3. Step on the scale barefoot with your feet aligned on the electrodes (metal strips)
on both the sides of platform. Note: you must be barefoot in order for the scale to
read your body analysis measurements.