Conair WW60XC Gebrauchsanweisung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Skalen Conair WW60XC herunter. Conair WW60XC 8 Seiten. Weight watchers bathroom scale

Seite drucken

Customizing Your Scale

1. To turn on the scale

• Press "Set".

2. To set the user number

• Within 3 seconds after pressing "set",

press user 1, 2, 3 or 4 to choose a user

number; "P-1", "P-2", "P-3" or "P-4"

appears; press "set" to save the user setting.

3. To set the start weight

• When "0.0" appears on the display step onto the scale.

• Adjust your position on the scale according to the leveler

indicators on the display. The indicators show where you

are off center. (Screen below shows that weight needs to be

shifted to the right of the scale.) When center diamond lights up, it indicates

ideal balance for accurate and repeatable weight measurement.

Off-center position

• Weight reading appears on the display with the word "start" illuminated and

then starts to blink.

• Get off the scale, press "set" key to save the reading as a start weight.

4. To set the goal weight

• After start weight is recorded, display automatically moves to the next screen:

goal weight. Goal weight with decimal point will blink with the word "GOAL"

illuminated. The scale will automatically calculate your goal weight as 10%

off your start weight, in accordance with generally accepted healthy weight

management guidelines.

If goal weight needs to be adjusted up or down from automatically calculated

goal weight, user can press "user 1" or "user 2" button at any time during the

30 seconds before display times out to adjust goal weight. Pressing a user but-

ton will adjust weight up or down by 1lb each time the button is pressed.

Pressing user button 1 will adjust weight up; pressing user button 2 will adjust

weight down.

• Once desired goal weight has been reached, press "set" to

confirm goal weight. "0.0" appears.

NOTE: If goal weight has not been set properly, goal weight in future weight

readings will be incorrect. If that happens, simply repeat customization

procedure.

• Display will turn off.

Center position