Conair BTS4C Series Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Massage Conair BTS4C Series herunter. Conair BTS4C Series 10 Seiten. Dual jet bath spa cordless
Auch für Conair BTS4C Series: Gebrauchsanweisung (4 seiten)
Seite drucken
DO NOT ATTEMPT TO CHARGE UNIT IN THE BATH TUB. DO NOT ATTEMPT TO USE UNIT
WHILE CHARGE ADAPTER IS CONNECTED TO THE UNIT.
IT IS IMPOSSIBLE TO OVERCHARGE THE BATTERY PACK. The battery pack can be charged
many times, but if your bath spa battery pack no longer accepts a charge, it may be necessary to
replace the battery pack. To replace the battery pack, your bath spa must be returned to an author-
ized Conair service center. There are no user serviceable parts inside your bath spa. Do not attempt
to disassemble this product. Opening or removing internal parts from your bath spa will void your
warranty and may expose you to voltage or other risks. Incorrect reassembling can cause electric
shock when the appliance is subsequently used.
IMPORTANT: In order to get maximum life from the bath spa battery pack, be sure to charge the bath
spa for 2-3 hours before initial use. Make sure the charge adapter is properly connected and charge
indicator is lit.
IMPORTANT: DO NOT dispose of the unit into household garbage. Your bath spa
contains a nickel cadmium (Ni-Cd) battery pack. Do not open or mutilate the battery
pack. Released electrolyte is corrosive and may cause damage to the eyes or skin.
It may be toxic if swallowed. For information on recycling or proper disposal, consult
your local solid waste collection or disposal organization.
A depleted battery that is ready to be discarded may appear to be no longer useful, but can still con-
tain a residual charge. Certain precautions must be taken to prevent batteries from short-circuiting.
• DO NOT dispose of battery pack in a fire; the cells may explode.
• DO NOT attempt to open or mutilate battery pack.
HOW TO USE
1) Attach unit securely onto tub (see how to attach bath spa to tub).
2) Fill bathtub with water.
3) Adjust height of motor assembly so that outlet nozzles are beneath
water. This can be done by moving the motor assembly up and down
Jet Stream
Bubbles
vertically; the housing employs detents which will hold the motor assem-
(Fig. 1)
bly at the desired height.
4) Point the water output nozzles downwards.
5) Adjust the bubble control switch on top of the unit to either "Jet Stream" or
"Bubbles" (see Fig. 1).
6) Turn the knob on the top of the bath spa to "on".
7) Turn the knob to "on/light" and the mood light will illuminate (See fig. 2).
8) Adjust the water output nozzles to create customized waterflow in your bath-
tub. The nozzles can be rotated to customize the direction of the water flow.
(Fig. 2)
9) After use, turn the know to the "off" position, drain water from tub, then remove bath spa.
10) Rotate your bath spa gently over the bathtub to remove excess water, and dry with a soft cloth
before storage.