Conair Ultimate GS28 Gebrauchsanweisung

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Küchengeräte Conair Ultimate GS28 herunter. Conair Ultimate GS28 2 Seiten. Fabric steamer

Seite drucken

IMPORTANT SAFETY

4. Never operate this appliance if it has a

damaged cord or plug, if it is not work-

INSTRUCTIONS

ing properly, or if it has been dropped or

damaged, or dropped into water. Do not

When using electrical appliances, espe-

attempt to repair the appliance. Incorrect

cially when children are present, basic

reassembly or repair could cause a risk

safety precautions should always be taken,

of fire, electric shock, or injury to persons

including the following:

when the appliance is used. Return the

appliance to an authorized service center

READ ALL INSTRUCTIONS

for examination and repair.

5. Keep the cord away from heated surfaces.

BEFORE USING

Do not allow cord to contact heated sur-

faces. Do not pull or twist cord. Let appliance

DANGER –

Any appliance is electri-

cool completely before putting away.

cally live even when the switch is off.

6. This appliance has a polarized plug (one

To reduce the risk of death by electric shock:

blade is wider than the other). As a safety

1. Always unplug appliance immediately

feature, this plug will fit in a polarized outlet

after using.

only one way. If the plug does not fit fully

in the outlet, reverse the plug. If it still does

2. Do not place or store appliance where it

not fit, contact a qualified electrician. Do not

can fall or be pulled into a tub or sink.

attempt to defeat this safety feature.

3. Do not place in, or drop into water or

7. Never drop or insert any object into any

other liquids.

opening or hose.

4. If an appliance falls into water, unplug it

8. Do not use outdoors or operate where

immediately. Do not reach into the water.

aerosol (spray) products are being used or

WARNING –

where oxygen is being administered.

To reduce the risk of

9. Do not use an extension cord to operate

burns, electrocution, fire, or injury to persons:

appliance.

1. This appliance should never be left

10. Surfaces of this appliance may be hot

unattended when plugged in.

when in use. Do not let heated surfaces

2. This appliance should not be used by, on,

touch eyes or skin.

or near children or individuals with certain

11. Do not place the steam nozzle directly on

disabilities. Unsupervised use could result in

any surface or on the appliance power cord

fire or personal injury.

while it is hot or plugged in. Use the stand

3. Use this appliance only for its intended

provided.

use as described in this manual. Do not

12. Unplug this appliance before filling or

use attachments not recommended by the

emptying. Do not overfill.

manufacturer.

SAVE THESE

13. While emitting steam, this appliance may

cause burns if it is used too close to the skin,

INSTRUCTIONS

scalp or eyes, or if it is used incorrectly. To

reduce the risk of contact with hot water

FOR HOUSEHOLD USE ONLY

discharging from steam vents, test appliance

before each use by holding it away from body.

UNPACKING INSTRUCTIONS

14. Do not operate steamer without properly

Place the box on a large, sturdy flat surface.

filling the water tank.

Carefully remove the appliance from the

15. Always keep the hose and nozzle

packing material. Keep all plastic bags away

elevated above the water tank.

from children.

16. Never yank cord to disconnect from

STEAMER

outlet. Instead, grasp plug and pull to

ASSEMBLY

disconnect.

STEP 1 - Attaching

17. Burns could occur from touching hot

the Telescopic

metal parts, hot water, or steam. Use care

Pole and Rotating

when removing water tank or when you turn

Hanger

a steam appliance upside down – there may

Insert the bottom

be hot water in reservoir.

of the larger metal

18. To reduce likelihood of circuit overload,

telescopic pole into

do not operate another high-wattage appli-

the holder on the

ance on the same circuit.

unit base and screw

19. If an extension cord is absolutely

the set screw until

necessary, a 15 ampere rated cord should

tight. (Caution: Do

be used. Cords rated for less amperage may

not over-tighten.)

overheat. Care should be taken to arrange

Then attach pieces

the cord so that it cannot be pulled or

as shown in Fig. 1.

tripped over.

20. Always remove the water tank from the

appliance before filling it with water.

21. When changing attachments, please be

sure the unit is off and no steam is being

released in order to avoid contact with hot

water.

22. Use caution when changing attachments,

as they may contain hot water from conden-

sation. Ensure the attachments are dry or

cooled off, to avoid contact with hot water.

STEP 2 - Attaching the Steamer Hose

pole firmly (Fig. 1). It is now in place to

Be sure the unit is off. Insert angled end of

rotate 360˚. Hang your garment and steam

hose into steamer housing and twist clock-

away wrinkles. Turn as you wish.

wise to securely lock hose onto housing. (Be

USING PANT CLIP SYSTEM

sure both connections at ends of hose are

This fabric steamer is equipped with a pant

correct before operating appliance.)

clip system for holding pants taut for faster

and more effective steaming. The bottom

clips can be adjusted by loosening the knob

(on the telescopic pole) and moving the pole

up and down, depending upon the length of

pants (see Fig. 2). Clip pants as shown in

Fig. 3 and steam. Please note some pants

may be too long to use the bottom clips.

If that is the case, just simply use the top

clips and let your pants hang freely.

Extend the telescopic pole and hang the

steam nozzle from the rotating handle. Hose

Fig. 2

may be stiff upon removal from box. Hose

will relax after initial use. Handle will sit

properly on pole support once hose is

relaxed. (Fig. 4)

TURNING THE STEAMER ON

The steamer has three settings:

Fig. 3

OFF

PAUSE

The pause feature allows you to stop the unit

from steaming if you need to step away from

Fig. 1

the unit for awhile, without actually turning

the steamer off.

USING ROTATING HANGER

This unit comes with a rotating hanger.

To use the hanger, simply place on top of

OPERATING

OPERATING THE STEAMER

1. Make sure the ON/OFF switch is in the

INSTRUCTIONS

OFF position.

2. Make sure all hose connections are

BEFORE FILLING

secure and tight.

THE WATER TANK

3. Make sure the telescopic pole is fully

Turn the water tank upside down and inspect

extended and the hose is not twisted

to make sure the valve and spring assembly

or kinked.

are functioning. Place the tank in the reser-

4. Plug the steamer cord into a normal

voir and check that it is seated securely. If

electrical outlet.

the tank has been stored with water inside,

5. Turn the ON/OFF switch to the

it may be necessary to remove the water

ON position.

and clean the tank. Follow the steps for care

6. The switch will light to indicate when

and cleaning.

power is on.

FILLING THE WATER TANK

7. Steam will be produced from the

(PRIOR TO PLUGGING IN THE APPLIANCE)

nozzle in about one minute.

Remove the water tank with the handle and

8. To turn the steamer off, turn the ON/OFF

turn upside down. Unscrew the valve in the

switch to the OFF position.

center of the base. Fill tank by holding it

under a source of running cold water until it

is filled to the desired level. Do not overfill.

Screw the valve cap onto the water tank and

return the tank to the upright position. Place

the water tank onto the base and make cer-

tain it is seated properly in the reservoir.

DO NOT FILL THE TANK WITH HOT WATER.

GETTING TO KNOW

YOUR STEAMER

Steam nozzle

Cool touch

handle with

360˚ rotating

easy-grip

hanger

raised ribs

Pant clips

Removable

5' cool-touch

Cord wrap

insulated hose

with storage clip

Telescoping pole

hangs garments

and nozzle and

collapses for

storage

Removable,

easy-to-fill and

easy-to-clean

2.5-liter water

tank with integrat-

ed carry handle

Fig. 4.