Conairphone SW2514 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon Conairphone SW2514 herunter. Conairphone SW2514 8 Seiten. Classic wallphone with caller id

Seite drucken

WHEN THE CALLER'S PHONE NUMBER HAS THE SAME AREA CODE AS

THE PRESET:

The long distance dialing digit '1' and the 3 digits area code will be

deleted automatically during Caller ID memory call back.

Press [CALL BACK], 7 digits number will blink. Press [CALL BACK] again to

confirm to dial the 7 digits number.

NOTE: Your telephone company may require a different format for making

out-of -area (toll) calls WITHIN your area code. See the next section for the

procedure to obtain the applicable tollcall format for your phone company.

WHEN YOUR TELEPHONE COMPANY REQUIRES YOU TO DIAL OTHER

THAN A 7-DIGIT NUMBER (SAME AREA CODE) OR 11-DIGIT NUMBER

(DIFFERENT AREA CODE) TO MAKE TOLL CALLS WITHIN YOUR AREA

CODE, FOLLOW ONE OF THE 4 OPTIONS BELOW FOR CALLER ID CALL

BACK.

Option 1

1+Area Code+7-Digit Number (11 digits)

Option 2

1+7-Digit Number (8 digits)

Option 3

Area Code+7-Digit Number (10 digits)

Option 4

7-Digit Number Only.

Follow the procedure below to select one of the above options for Caller

ID call back.

With the handset hung up on the base.

1. Press [ ] or [ ] to find the Caller ID memory location to redial. Press

[CALL BACK], the 7-digit number (if same area code) or 11-digit number

(if different area code) will blink.

2. Press [ ] or [ ] to select one of the options.

3. Press [CALL BACK] again to confirm the dial.

LOW BATTERY INDICATION

The SW2514 will signal you when the batteries become weak and need

replacement. Once battery power has been sufficiently drained, the

SW2514 will appear the BATTERY LOW icon (

Replace the AAA batteries with four(4) fresh ones, and keep the line cord

plugged in between the phone and wall outlet in order to maintain the

Caller ID and Speed Dialing memories. If you do not install fresh batteries

within 2 minutes, your Caller ID and telephone memory information may

be lost.

CONSUMER INFORMATION

This equipment complies with Part 68 of the FCC rules and the requirements

adopted by the ACTA On the bottom of this equipment is a label that

contains, among other information, a product identifier of

US:DJTMT08ASW2514. If requested, this number must be provided to the

telephone company.

The applicable jacks (i.e. RJ11C) for this equipment are provided in the

packaging with each piece of approved equipment. The jacks are certified

by Universal Service Order Codes (USOC).

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant telephone cord and

modular plug are provided with this product. They are designed to be

connected to a compatible modular jack that is also compliant. See

installation instructions for details.

The Ringer Equivalence Number (REN) is used to determine the number of

devices that may be connected to a telephone line. Excessive RENs on a

telephone line may result in the devices not ringing in response to an

incoming call. In most but not all areas, the sum of RENs should not

exceed five (5.0). To be certain of the number of devices that may be

connected to a line, as determined by the total RENs, contact the local

telephone company.

If this equipment SW2514 causes harm to the telephone network, the

telephone company will notify you in advance that temporary is continuance

of service may be required. But if advance notice isn't practical, the telephone

company will notify the customer as soon as possible. Also, you will be advised

of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the equipment. If

this happens the telephone company will provide advance notice in order for

you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, disconnect it from the network

until the problem has been corrected or until you are sure that the equipment

is not malfunctioning.

Please follow instructions for repairing if any (e.g. battery

) on the LCD display.

replacement section); otherwise do not alter or repair any parts of device

except specified.

Connection to party line service is subject to state tariffs. Contact the state

public utility commission, public service commission or corporation commis-

sion for information.

This equipment is hearing aid compatible.