dams TGDMARM Installationshandbuch

Blättern Sie online oder laden Sie pdf Installationshandbuch für Racks & Ständer dams TGDMARM herunter. dams TGDMARM 2 Seiten.

Seite drucken
Item No.: TGDMARM
Installation guide
32
2-9Kg
90
STEP 1
The Preparation Before Monitor Installation
1.Make sure there are VESA holes 100x100mm or 75x75mm in the monitor. If not, cannot be installed.
2.Remove the original fixed base of monitor.Be careful not to scratch the screen.
STEP 2-A
Option1: Clamp
1
1
2
C
4
E
M4x12mm
M5x12mm
M6x12mm
4x4
Allen Key
A(8PCS)
B(8PCS)
C(3PCS)
D(16PCS)
E(1PC)
1.Support arm (1PC)
2.Base Mounting Plate (1PC)
3.Protection pad (1PC)
4.Protection pad (1PC)
1
5.Perforated plate (1PC)
6.Long screw (1PC)
7.Protection pad (1PC)
8.Pressure plate (1PC)
9.Handwheel (1PC)
10.Mount Plate (2PCS)
11.Clip (2PCS)
2
75x75mm,100x100mm
Desktop
!
Caution
4
3
3
Tighten
STEP 2-B
Option2: Grommet
5x5
Allen Key
F(1PC)
1
2
10
5
C
E
6
5
11
6
Notice: Keep the counterbore
4
side down
7
3
5
8
9
For desk thickness: 25-100mm
9
Tighten
STEP 3
Connect the plate and monitor
1
D
/
A
B
STEP 4
Install the monitor to the arm
1
For desk thickness:
20-30mm
DESK
3
4
Desktop
Available hole size:8.5-70mm
2
Use the allen key (F) to tighten the screw
monitor
10
Use washer if needed
(D)
2
4
7
8
Tighten
F
Lock
Connection plate
Hang the monitor on the plate
from top to bottom and ensure
it is tightened