Conambo K10C Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Kopfhörer Conambo K10C herunter. Conambo K10C 6 Seiten. Wireless headset

Seite drucken

 Answering/Reject a Call

1) When a call is coming, press the Multi-Function Button

once to answer the call and press it again to end the call.

2) When a call is coming, press and hold the Multi-Function

Button 1-2s to reject the call.

 Last Number Redial

1) Make sure the headset is connected to your phone.

2) Double-tap the Multi-Function Button to redial the last

number.

 Phone Voice Control (e.g. Siri/ Google

Assistant )

Press the Mute Button for 3s while the headset is in

standby status to activate voice command functions on

your phone. Support for this is phone dependent.

 Adjust the volume

Press the volume up or down during a call or while

streaming audio.

 Mute

During a conversation, press the Mute button. You hear

"mute on" or "mute off".

 Reconnect

1) Your headset will direct connect with previous Bluetooth

device.

2) If the headset doesn't connect, please hold

Multi-Function Button for 5s until the blue and red

indicator flashes alternately to enter pairing mode.

 Resetting

When charging, hold the Multi-Function Button for 4s till

the blue indicator flashes to recover default settings.

4.Wearing

NOTE Remove your eyeglasses before donning the headset

for best fit.

To wear the headset on your other ear, rotate the boom

upwards then twist it around so the eartip is on the other

side before lowering the mic boom.

42029----4

5.Troubleshooting

I.The mobile phone can not find the headset

Possible Reasons:

1) The headset is not under ON and standby state;

2) The headset program is error;

3) The program of mobile phone is error.

Solutions:

1) Turn on the headset, hold the Multi-Function Button for

5s(red and blue indicator flashes alternately)to enable

pairing status;

2) Recover the Wireless headset's default settings if the

headset program is error.

3) After restart the mobile phone, remove all pairing data

in the Wireless of the mobile phone.

Cautions:

1) After the Wireless headset has entered in the pairing

mode, it will connect within 2mins, otherwise the

headset will automatically turn off.

2) When charging, hold the Multi-Function Button for 4s till

the blue indicator flashes to recover default setting.

II. No sound from the headset

Possible Reasons:

1) The volume of the mobile phone is unsuitable;

2) The Wireless headset and mobile phone are not

connected correctly;

3) The Wireless headset is out of the working range.

Solutions:

1) Adjust the volume in the mobile phone;

2) Operate with the reference of the use steps;

3) Keep the headset in the range of 10m to the mobile

phone without any obstacle.

Cautions:

1) Do not have any other operation when searching

headset for avoiding program error;

2) Please use headset near the mobile phone to assure

stable signal.

III. Charging red indicator doesn't light on

Possible Reasons:

The headset has not been used for a long period.

Solutions:

Charge headset for 30mins, then the red indicator may

light on.

Cautions:

It will drop the capacity and service life of the battery if it is

over charged or the Wireless headset is stored in the

environment such as closed car.

Made by

SHENZHEN KENANBO TECHNOLOGY CO.,LTD

Add: RM. 208, Building 2, Jinfanghua E-business Industrial

Zone, No 450 Bulong Rd. Bantian Street, Longgang District,

Shenzhen.

TEL: 86-755-88608031

E-mail: [email protected]