DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Aufnahmegeräte DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center herunter. DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 Seiten. Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface

Seite drucken
Installation Guide AX Center
Fixed IP address
You must have a preferred range of IP addresses, and a network mask for the computer network and the
connected AX Center units.
1.
Configure your computer IP address and network mask via the computer control panel to e.g. 10.0.7.25 |
255.255.255.0
Select AX Center in the DADman Settings/ Device List menu by right clicking on the unit line and select 'Network
settings' when using a Windows PC. On MacOS you use the 'Action' button to select 'Network Settings'.
In DADman, configure each AX Center in turn with a unique IP address and the preferred network mask e.g.
10.0.7.21 | 255.255.255.0. In this window you can also configure the IP audio network settings.
When you are done you can connect more than one AX Center to the network, and they will appear in the
DADman Device List.
Automatic IP address
You must have a network with a DHCP server which will allocate the IP addresses, or the IP address will self-
assigned.
1.
Configure your computer IP address via the computer control panel to DHCP.
Select the AX Center in the DADman Tools / Device List menu by right clicking on the unit line and select
'Network settings'.
If you have more AX Center units connected, they will all be configured with IP address via DCHP.
2.
Once the DHCP system has allocated an IP address to the unit it will appear in the DADman Device List
with the name AXCNTR.
Note. In order to have proper function of AX Center the routing and sample rate configuration has to
be set correctly via DADman.
Doc no. AXCNTR-8001-A-4
Figure 3, DADman Device list w. settings
Rev. date 221023
Page 8 of 19