2Boom BX390 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner 2Boom BX390 herunter. 2Boom BX390 5 Seiten.

Bluetooth :

1. Turn the power button to "ON", The LED screen will display bt and beep twice,

twinkling quickly.

2. Activate Bluetooth of mobile phone and search for device name

"2BOOM-BX390" then connect it. The bt on the screen stop twinkling and beep three

times once connected successful.

3. Play the music from your mobile phone and enjoy.

4. Press LAST or NEXT button on the devices or on Mobile phones to select songs

you like.

5. Press Play/pause button on the devices or on Mobile phones to play/stop the

music

6. Use the "Volume Gear "to adjust volume up and down. Or adjust the mobile

phone's volume.

7. Use the "Bass Gear" to adjust bass.

Remark: EQ works for USB, SD only, It do not support Bluetooth and Aux in mode.

Playing music from USB disk & SD card

1. Turn the Power button to "ON".

2. Insert SD card or USB ﬂash disk into slot, the music stored will be played

automatically and LED screen display the songs playing.

3. Under playing mode, short press Forward or Backward button to select songs

you like, long press to fast forward or backward the song.

4. Press PLAY/PAUSE to play or pause.

5. Please turn the Power button to "OFF" while without use.

Remark: Under Bluetooth playing mode, if insert SD or USB disconnect the

Bluetooth and switch the playing from USB or SD card. You can press the MODE

button to switch to Bluetooth mode again.

FM Radio:

1. Under FM radio state, Please insert the audio cable to get the best FM signal

before using.

2. Turn the power button to "ON", press the "MODE" button to switch to FM

radio state.

3. Under playing mode, short press "Play/pause" button to auto search the FM

Channel and store it automatically.

4. Press LAST or NEXT button to change the stored FM channel.

AUX-IN:

For other compatible music devices or your MP3/MP4 players, use the supplied

audio line cable to connect from the device's "Line Out" to the "Aux In" of this

devices. Then press the "MODE" button to switch to AUX-IN state. Enjoy...

When using an external device, all functions will be controlled by the external

devise except the "Play/pause" button.