Concepcion-Carrier WINDOW ROOM AIR CONDITIONER Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Klimagerät Concepcion-Carrier WINDOW ROOM AIR CONDITIONER herunter. Concepcion-Carrier WINDOW ROOM AIR CONDITIONER 8 Seiten. Window room air conditioner

Seite drucken

Outer wrapper

Air filter

(behind the front grille)

Front gril

gril

wer cord

Remote control

Main Unit

MODE

Control Panel

Remote Model

Operating the Unit through the Remote Control

To turn the unit on or off

, press the Power Button.

(Note: The equipment sounds a " beep" for each activated

function)

Fan

To adjust the air speed

Speed

selection button.

The speed can be selected between one of the 3

levels.

For increasing or decreasing the room

temperature , press the Temperature buttons (+) or

(-), as necessary .

Temp

(Note: The temperature adjustment varies from 18 to

29˚C, and upon reaching the maximum or the

minimum, the unit sounds 2 beeps.)

To provide cooling

, press the Cool function button.

Cool

When this function is activated, a

the control panel display .

For the unit to adjust

Auto

temperature variations, press the

button. This function also controls the fan speed.

To eliminate the room air

Dry

function button. The unit will operate always in low

cooling.

Fan

To provide air at cert

ain fan speed without

cooling, press the Fan button.

To have more comfort while sleeping

Sleep function button before going to sleep.

Sleep

function adjust gradually the temperature, avoiding

the excessive cold or heat due to the body

metabolism deceleration.

To quickly cool the room

, press the

button. This will temporarily set the Fan speed to

Turbo

high.

When this function is activated, the letter t lights up at

the panel display . The turbo will be turned of f when

the selected temperature is reached.

OPERA TION PR

REMO TE MODEL

Power Button

If you press this button, the unit will begin operation. Press the

button again, and operation stops. (Y ou can hear a receiving beep.)

Air inlet louver

Temperature Setting Buttons

4-W ay airflow

If you set the desired room temperature, then the unit will maint

direction

the room temperature at the set temperature.

Control panel

Operation Mode Selecting Button

Control cover

Press this button to select the desired mode.

In COOL mode, the unit will run at normal cooling mode.

In FA N mode, only fan will operate at the selected fan speed and

circulate the room air .

In DR Y mode, fan speed goes to low and dehumidification takes

place.

In AUT O mode, fan speed will be automatically controlled by the

microcomputer of the unit.

Timer Light Indicator

Indicates that the Timer function is ON .

Timer

press the Fan S

peed

Temp

Operating the Unit through the Control Panel

Select Functions

F - F an

D - Dry/Dehumidifica tion

letter C lights up at

Press once "Mode" button and

appear at

desired function is reached. Release the button and the unit

according to the room

assumes this new programming.

Auto function

To alter the fan speed, press

will show the programmed speed F1, F2, or F3.

or "

moisture, press the Dry

button and the unit will assume this new programming.

To change ˚F to ˚C or vice versa, press "Mode" and "

buttons simultaneously for 3-5 seconds.

FA N P L UG O P E R AT IO N

1. Plug the "Electric Fan" into the built-in recept

the air conditioner service cord.

2. Set the controller consistent to the comfort level you desired.

, press the

3. Press the timer button on the remote controller to set the

This

desired hour settings.

Example : You want your air conditioner to turn on from 9:00

P.M. to 2:59 A.M. and turn of f at 3:00 A.M. Press the power

button to start the air conditioner . Set the controller consistent

Turbo function

to the desired temperature setting. Press the timer on the

remote controller and then press the (-) button or (+) button to

adjust the time setting to 6 hours. Unit cools for those hours

and goes of f at 3:00 A.M. The "Electric Fan" (except for those

controlled by a wireless remote control) will then turn-on and

continue to ventilate the air conditioned room.

NOTES:

Heat - this button can function only for unit s that are configured

as "heat pump" .

OCEDURE

For programming the unit to turn off

time (from 1 to 12 hours), press the T

When this is activated, the corresponding LED

remains turned on at the p anel.

Note: The unit display will be turned of f 5 minutes after

the function activation, while the

remains on.

To adjust the turning off time

, press the Adjust

buttons (+) or (-) until the desired time is reached

.These buttons adjust the time in 1 hour interval, from

1 to 12 hours.

Note: To cancel this function press the

again, and adjust the time to 0.

C - Cooling

A - Auto (Automa tic )

programmed function

the display

, then press "

" or "

"Mode" button twice. The display

" buttons until the desired speed is reached. Release

ain

after a cert ain

imer button.

Timer indicator

Timer button

will

" buttons until

the

Then press "

acle outlet on