Concept Pro AIR3526-IP2M Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Sicherheitskamera Concept Pro AIR3526-IP2M herunter. Concept Pro AIR3526-IP2M 8 Seiten. Ip external medium bullet camera
Seite drucken
1. CONTENTS
Packaging Contents
Technical Documents
2. INSTALLATION
Important: Ensure all precautionary procedures are observed during installation.
It is recommended that the camera is tested in low light and day light conditions
at the point on installation to ensure continuity of effective CCTV monitoring.
1
2
3
4
IP Camera x1
Fitting Screws x3
Sunshield x1
Mounting Template x1
RJ45 Waterproofing Cap x1
1. Open Packaging
Open packaging, remove camera, and set aside the
included accessories. Locate the cable cutout on the
side desired.
2. Drill Mounting Holes
Attach the included mounting template on the
mounting surface and drill holes according to the
template. Insert included wall plugs into the holes.
3. Mount the Camera
Insert cables through the mounting hole.
Position the camera over the mounting holes and use
the included fitting screws to affix the camera to the
mounting surface.
4. Adjust Camera Positioning
Loosen locking screws and axes to move the camera
to the desired monitoring angle. Re-tighten after the
desired angle is found.
Quick Start Guide x1
Wall Plugs x3
Sunshield Bolt x1
Allen Key x1
Terminal Blocks x2
(except AIR3526-IP2M & AIR3526-IP4M)
IP CAMERA QUICK START GUIDE