AirTurn STOMP 6 Anleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Musikanlagen AirTurn STOMP 6 herunter. AirTurn STOMP 6 8 Seiten.

The following table shows each Mode and respective switch function:

CHANGING THE MODE

1.
Turn on the STOMP 6.
2.
Press and hold the Switch 6 for 2 seconds. The LED will flash red once
per second from 1 to 6 flashes. The number of flashes corresponds to the
same MODE number. Be sure to count the flashes.
3.
Release Switch 6 following the number of flashes that reflects the desired
MODE. The orange LED will flash the number of times indicating which
MODE has been set.
Example: To set MODE 3 hold Switch 6 for 3 flashes of the red LED, release
and the orange LED will flash 3 times to confirm the MODE 3 setting.
Note: Once the MODE has been set, it will remain the same until it is changed
following the above steps.

KEY REPEAT FUNCTION

To turn on the Key Repeat function, hold down switches 2 and 4 together. Once
you have turned it on, holding down a pedal or button, (except button 6) in any
MODE for more than two seconds will repeat the key action twice per second
MODE 1
1) Page Up
2) Page Down
3) Left Arrow
4) Right Arrow
5) Enter
6) b
MODE 3
1) Up Arrow
2) Down Arrow
3) Left Arrow
4) Right Arrow
5) Enter
6) b
MODE 5
1) Volume Up/Camera
2) Volume Down
3) Previous Song
4) Next Song
5) Play/Pause
6) Home (iPad)
MODE 2
1) 3
2) ;
3) P
4) Shift + R
5) Space
6) Ctrl + Z
MODE 4
1) F9
2) F7
3) F4
4) Ctrl + Shift + T
5) F8
6) F3
MODE 6
1) Space
2) Enter
3) 1
4) 2
5) Home (iPad)
6)Virtual Keyboard
4