ADDER X-DVIPRO-DL Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender ADDER X-DVIPRO-DL herunter. ADDER X-DVIPRO-DL 17 Seiten.

Installation

Installation of the X-DVIPRO-DL modules is straightforward and requires minimal

configuration in most cases.

•

Connections at the local module

•

Connections at the remote module

Note: After all connections have been made, power up the display screen and the remote

module first. Then power up the local module and finally switch on the computer. This will allow

each item to correctly discover, in order, the one immediately downstream.

Mounting the modules – desk or rack

The X-DVIPRO-DL modules can be situated on a desk or alternatively, for larger

installations, mounted within an optional rack mount chassis.

Desk mount

Apply the supplied self-adhesive rubber feet to

the underside of the module.

Rack mount

1 Place the rack securing plate (available as a separate kit) onto the front of the module

and secure it with the two countersunk screws.

2 Orient the X-DVIPRO-DL module on its side so that its labeled face is the correct

way up.

3 Slide the module into the required rack position. The rectangular cut-out in the front

upper lip of the rack allows the two screws on the module's upper edge to slide

through.

4 The rack mount chassis has a series of holes in its floor that are

spaced to accommodate the two screws on the module's

lower edge. Ensure that the screws correctly locate

into the two holes of the chosen slot. The rack

securing plate on the module should now be

flush with the front of the rack mount

chassis.

5 Use the third (pan-head)

screw, in the top hole

of the rack securing

plate to fasten the

module to the rack.