Elite ELITE B 20 Gebrauchsanweisung - Seite 16
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Elite ELITE B 20 herunter. Elite ELITE B 20 19 Seiten. Drill grinding machine up to o 20 mm.
Seite drucken
By means of the tool holder and the movement of the motor, we can perform the core
casting using the left side of the grinding wheel.
Once one side is finished, note the position of the vernier and move the position back one
turn. Now we can turn the tool holder 180°, fix it again in the hole C and move the vernier
to the noted position.
Joan Oró, 27. Pol. Ind. Sesrovires, St. Esteve Sesrovires, BCN, Spain– Tel: +34 932 935 178 – [email protected]
Core emptying of twist drills
With the new clamping prism, it is now possible to empty the
core of the already sharpened drill bit.
Holes A and B are for sharpening 4-faceted drills.
1.
Hole C is used for coring.
2.
For core drilling, we have to position the drill bit 25 mm outside
the tool holder without changing its position in the prism.
Outside the tool holder without changing the position of the drill
bit in the prism. Fix the tool holder with the knurled screw in
position C.
Use the upper position of the tool holder. Release the clamp and
position the holder at 90°.
16
Fixing screw
Tool holder support
Clamping cam
90º