Airuno Aida 60 Installations- und Gebrauchsanweisungen - Seite 9

Blättern Sie online oder laden Sie pdf Installations- und Gebrauchsanweisungen für Lüftungshaube Airuno Aida 60 herunter. Airuno Aida 60 12 Seiten. Built-in cupboard hood

Seite drucken

4.3 Carbon Filters

The hood can be used with active carbon filters which

traps the cooking smells. There are either polyester or

long life carbon filters and these are situated behind

the grease filters.

4.3.1 Polyester Carbon Filters

These cannot be reused or washed and must be

periodically changed (every 4 months if the hood is

used for 2 hours every day). Saturated filters could be

a fire hazard. The filters in the Aida are rectangular.

4.3.2 Long Life Carbon Filters

These can be cleaned and reactivated. The filter

should be cleaned every other month if used

normally. The filter is best cleaned in a dishwasher at

the highest temperature using normal washing

detergent. The filter should be washed on its own to

prevent particles of food fastening in it and then

causing an unpleasant smell later on (Fig 23).

To reactivate, the carbon filter should be dried in the

oven. Choose upper/lower heat and maximum 100°C

and dry the filter for 10 minutes (Fig 24). The filter

must be changed when it no longer absorbs the

cooking smells sufficiently.

Fig 15

4.4 Cleaning the Hood

The surfaces of the hood should be cleaned

frequently, to avoid the risk of having to remove built

up and encrusted deposits and stains.

For the painted or copper plated hoods just a soft

cloth with warm water and a neutral detergent. Do

not pour the detergent directly onto the hood or use

powdery or abrasive products. For the stainless steel

hood, use special products and cloths for satin finish

stainless steel (not abrasive, corrosive detergents or

detergents containing chloride), ensuring to clean in

the same direction as the satin finish.

Do not use aggressive products, chemical solvents or

derivatives of oil distillates that could leave oily traces

which could cause oxidation and polymerisation.

The manufacturer accepts no responsibility for

damage to the surface of the hood due to failure to

respect these instructions.

5. Technical Data

Control

Colour/finish

Lighting

65°C

Airflow (m

Fig 23

Pressure (Pa)

Noise (db)

Power (W)

Voltage (V)

Outlet Width (mm)

Energy Class

100°C

Aida 60 & 90 with H850 Motor

Soft touch/remote control

Stainless steel/glass

2 x LED (4000K)

/h)

10 min

Fig 24

322/563

582

52-64

280

220-240

150