Anybus X-gateway Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Server Anybus X-gateway herunter. Anybus X-gateway 20 Seiten. Profibus master interface
Auch für Anybus X-gateway: Installationsblatt (2 seiten), Netzwerk-Handbuch (14 seiten), Netzwerk-Handbuch (16 seiten)

Seite drucken

Installation

3
Installation
3.1

DIN Rail Mounting

Mount on DIN rail
The unit is designed to be mounted on a standard DIN rail. No tools are needed.
1.
Hook the unit onto the upper lip of
the rail and push gently downwards.
2.
Push the unit towards the rail until it
snaps into place.
Remove from DIN rail
1.
Push the unit gently downwards on the rail.
2.
Pull the bottom end of the unit free of the rail and remove it.
Sideways Mounting
The unit can alternatively by mounted sideways on the DIN rail. A T10 Torx screwdriver is
needed to reposition the DIN clip.
1.
Remove the sticker covering the
screw holes on the right side panel.
2.
Unscrew the DIN clip from the back
of the unit.
3.
Refit the DIN clip to the side panel.
®
Anybus
X-gateway
™
User Manual
The unit must be electrically grounded through the DIN rail for EMC compliance.
1
2
Fig. 5
Push down to mount or remove
1
Remove for optional DIN re tting
Fig. 6
Refit the DIN clip to the side panel
11 (18)
2
3
T10
HMSI-27-262 3.0