AnyFit PS04 Anleitung Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Fitnessgeräte AnyFit PS04 herunter. AnyFit PS04 12 Seiten. Leg extension / leg curl
Seite drucken
Step 3
1. Attach 2×Guiding Rod (#19), 2×Guiding Rod Cover (#36), 1×Top Plate Assembly (#17),
Weight Plates (#76), (#77), 2×Buffer Pad of Weight Plates (#35), 2×Weight Support
(#16), 2×Rubber Pad Φ60×Φ19.3×5 (#34) to Weight Frame Assembly (#1) using :
2 × Socket Head Cap Screw φ7.5×M10×45 (#31)
2 × Flat Washer Φ11XΦ20X2 (#52)
2. Connect Top Plate Assembly (#17) to Rotating Plate Assembly (#4) thru cable (#18),
make sure the cable goes through the pulley correctly as per the picture below shows,
31
36
19
17
76
20
18
35
34
13
2 × Hex Nut M10 (#69)
69
52
1
77
4
16
Step 4
1. Attach Storage Box (#72) to Front Cover (Left) (#10) and Front Cover (Right) (#11)using:
8 × Cross Recessed Round Head Screw (#74)
8 × Flat Washer Φ4.3×Φ12×1 (#73)
2. Attach Front Cover (Left) (#10), Front Cover (Right) (#11), Side Cover (Right Front)
(#42), Side Cover (Left Front) (#43)，Bottom Cover （#48 ）to Weight Frame Assembly
(#1) using:
4 × Flat Washer Φ5.5×Φ15×1 (#49)
4 × Flat Washer Φ8.5×Φ16×1.5 (#51)
10 × Button Head Cap Screw M6X20 (#57) 4 × Button Head Cap Screw M8X16 (#58)
3. Attach Back Cover (#47), Side Cover (Right Rear)(#44), Side Cover (Left Rear) (#45) to
Weight Frame Assembly (#1) using:
4 × Flat Washer Φ5.5×Φ15×1 (#49)
4 × Button Head Cap Screw M5X10 (#56) 10 × Button Head Cap Screw M6X20 (#57)
4. Attach 2×Top Cover (#46) to Weight Frame Assembly (#1) using:
10 × Button Head Cap Screw M6X20 (#57)
5. Attach Back Pad Frame (#14) to Main Frame Assembly (#2)
46
57
47
45
56
49
44
57
50
10 × Flat Washer Φ6.5×Φ12×1.2 (#50)
4 × Button Head Cap Screw M5X10 (#56)
10 × Flat Washer Φ6.5×Φ12×1.2 (#50)
1
14
11
2
56 49
43
46
57
50
57
74
42
72
48
10
58
51
73
14