Anyload ES-103HA Produkthandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Produkthandbuch für Skalen Anyload ES-103HA herunter. Anyload ES-103HA 9 Seiten. Precision balance

Operation

Put the round plug of AC adapter into the square hole at the back of the

balance, then put AC adapter into an alternating outlet with two holes. Or

install 6 alkaline batteries AA SIZE in the battery holder at the bottom of the

balance (pay attention to the Plus(+) and minus(-) ends).

With no load on the platform, press

be shown, then the software version is displayed. When "0" is displayed,

weighing can be done.

To turn off the balance, press

Press

to set the display to zero. Put the object to be weighted on the

platform. Wait until the unit "g" appears and the reading is stable, then the

weight can be read

When precision weighing is done, calibrate the balance as follows:

First take away the object from the platform, then press

display to zero.

Press

, displaying "SCALE" or "LINE". "SCALE" means calibrating the

balance sensitivity; "LINE" means calibrating the balance linear.

Press

to make sure (If press

interchangeable.)

When calibrating the balance sensitivity, two different weight values can be

used. According to the shown calibrating weight value, press

two calibrating weight values can be interchangeable, press

sure. After that, the balance will display "0". In a few seconds, the balance will

display the calibrating weight value. At this time, put the corresponding

calibrating weight on the center of the platform according to the shown weight

value.

4 |

ANYLOAD ES-HA Series Precision Balance Product Manual (V1611)

. All the segments of the display will

while the balance is at work.

, the two kinds of calibration can be

to set the

, the

to make