ANYTEC 868 CAB Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für Boot ANYTEC 868 CAB herunter. ANYTEC 868 CAB 16 Seiten.

Manual Anytec 868 CAB

W- The combined capacity of the bilge system is not designed to withstand bailing of the

boat if the hull is damaged.

3.16 Fuel System

The system comprises of a fuel tank, venting and filling. Watch out for any spillages or

odours in order to ensure the best possible function. An inspection hatch for the tank is fitted

in the middle sofa. Fuel filters are mounted in the anchor box in front of the engines.

3.17 Control

Hydraulic control with capacity for engines up to 1x300 hp. See the manual for care and

maintenance. Oils other than the oil prescribed must not be used. When fitting engines from

1x350 hp to 2x400 hp the boat must be equipped with power assist. This is needed to maintain

stiffness in the steering system at high speeds

3.18 Cooling system

Cooling water is taken in via the rig. Be careful when tilting out the engine too far while it is

running so that the intake is over the surface of the water.

W-The engine has an overflow pipe that can be used to verify that water is being

pumped to cool the engine

3.19 Storage

The storage compartments are ventilated and have rugged hinges made of aluminium. Grease

them if needed.

W-Never keep things in the storage that is located below deck in the stern. The electrical

equipment that is fitted there can get destroyed

Anytec Sweden AB

Magasinsgatan 7

903 27 UMEÅ

0770-220 210

https://www.boat-manuals.com/

2017 (REV A)

- 13 -