AnyTone AT-5289 Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Radio AnyTone AT-5289 herunter. AnyTone AT-5289 13 Seiten.
Seite drucken
For example to turn off Beep sound.
A. Press FUN, the LCD display "FUNC", when "FUNC" disappear,
press PRG, then turn channel knob to choose BEP menu.
B. Press PRG again, then turn channel knob to choose off.
C. Press PRG to exit BEP setup.
D. Press EXT to exit SET.
The functions menu in the set SET function:
TOT : Time out timer
SCN : Scan mode,optional TI. SQ Default mode: SQ
SQ: When scanning find a signal, the scan will not stop when the
signal existing.
if the signal last for 30 seconds, the scan will stop for 30
seconds, then stop for 5 seconds(Depend the Scan recovery
time you set), if no operation during the 35 seconds, the
scan will start again.
TI: When scanning find a signal, the scan stops for 5
6
seconds(Depend the Scan recovery time you set), if no
operation during this 5 seconds, the scan will start again.
SCT : Scan recovery time optional: 5S. 10S. 15S Default: 5S
BEP : key sound optional: ON. OFF, Default: ON
PD : channel data edit mode, Optional: ON. OFF Default: OFF
OFF: When enter channel date edit (PRG function), the changes
is only for present channel.
ON: When enter channel date edit (PRG function), the changes is
for all the channel.
STEP : In VFO mode,turn the channel knob to choose the step size,
Optional: 5K. 10K. 100K. 1M Default: 5K
Note1:The function menu setup can be done also by FUN key+ function
buttons, they are same.
EXT key
111
EXT: Press this key to exit channel data setup and function menu
setup.
LOCK (channel lock function)
Press FUN, the LCD display "FUNC", when "FUNC" disappear, press
EXT, the LCD displays "LOCK" then disappear, all the keys except
FUNC,CH9,CH19 is valid, the rest keys are locked. Press FUNC+EXT
again, LCD displays UNLOCK then disappear, the LOCK function is off
CH9 key
121
CH9: Press CH9 to jump to emerge channel 9 in present band, the
LCD will flash; all key except CH9, FRQ key is valid. Press CH9 again to
turn off emerging channel.
+1M In VFO mode, press CH9 to increase the frequency by1MHZ.
CH19 key
131
CH19: Press CH19 to jump to emerge channel 19 in present band, the
LCD will flash; all key except CH19, FRQ key is valid. Press CH19 again
to turn off emerging channel.
-1M : In VFO mode, press CH9to decrease the frequency by1MHZ.
FRQ (Frequency mode: VFO)
141
Press it to switch between channel mode and frequency display mode.
In VFO mode, press FRQ key, the LCD will display "-- --. -- -- --",
you can input the frequency by the keys, ,The numbers are below the
buttons. for example, 0/BEP stands for 0, 1/TOT stands for 1, after input
5 numbers, the radio will exit frequency input mode and back to normal
states.
ECHO
151
Press ECHO key, they LCD will display "ECHO", and Echo function is
turned on, press it again to turn off echo function.
PTT key (Transmitting )
161
To transmit, press and hold the key (16) [PTT] and the TX icon will
appears on the LCD.
For best quality, please speak normally at a distance of 2 - 4 inches.
Speaking too loudly will cause distortions and make the signal difficult
to understand.