DuctSox SimpleSox Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Fan DuctSox SimpleSox herunter. DuctSox SimpleSox 4 Seiten.

Seite drucken

Step 6

Install the fabric.

Sample System

Inlet

5' Section

Adjustable Air Outlet

1400 CFM

at 0.5" w.g.

Secure attachments to

suspension system

(inlet section first if not

zipped together).

Step 7

To prevent "sagging," use excess cable and cable clamps for mid-

supports every 30 feet maximum.

Step 8

Install cable stops. Once system is properly adjusted, deflate the

system, pull the last snap in each straight section, and secure tension

using cable clamp to cable (will reduce inflation "popping"). If the system

includes elbows, secure the last snap before elbow(s).

Cable clamps are provided to secure snaps.

Failure to install the SimpleSox

Step 9

Rotate the Adjustable Air Outlet (AAO) sleeves as needed. All AAO settings are set on Medium. CFM

ranges are diameter specific. Please see AAO insert sheet for details.

NOTE: When adjusting AAOs, the SimpleSox

folded back to expose the hook and loop fasteners on the AAO. Once adjustments are made, fold back

the flaps to cover zippers and hook and look fasteners.

15' Section

Slide SimpleSox

inlet over collar

and position the zipper start/stop at top

center and tighten the DuctBelt.

Secure anchors with standard screws

(not provided) after start-up (to ensure

proper inflated alignment).

System correctly can void warranty.

System should be inflated, AND the flaps should be

Adjustable Air Outlet

15' Section

Clip SimpleSox

Connect sections together with zippers.

The pull (female end) of the zipper is

located towards the end away from the

inlet of the section.

Installation Guide: SimpleSox

Adjustable Air Outlet

Total Length = 76.5'

System onto cable.

30' MAX

System