Anywhere Fireplace Tribeca II 90201 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Innenkamin Anywhere Fireplace Tribeca II 90201 herunter. Anywhere Fireplace Tribeca II 90201 4 Seiten. Fireplace

Seite drucken

Step 7

Insert glass panel into the slots located on the inner sides of

the fireplace.

Step 9

Be sure to use a long lighter or long match to light the fuel in

the burner and ENJOY! Never refill while hot. Wait until it is

cool to touch.

CAUTION: Fireplace will be hot while lit and may stay hot for a while after extinguishing the flame.

ALWAYS USE CAUTION when lighting the fireplace. Never fill the burner with more fuel while the fireplace is still hot

or burning. Allow it to cool down before refilling with fuel.

Also supplied with your fireplace is a cover that fits over it. If you plan to use your fireplace outside, please keep it covered when not in use

to insure that water and depris does not get into the burner and prevent it from functioning properly. Never put cover on while

fireplace is hot.

NOTE: Should you choose to mount your fireplace on the wall rather than use it on a stand, the base may be removed and with a wall-

mount part kit it can be converted to a wall-mount fireplace. The wall-mount part kit is available for sale at www.anywherefireplace.com.

Step 8

Using the funnel provided, (Part N), carefully pour in the liquid

ethanol fuel for fireplaces into the burner about ¾ full. Make sure

you do not over fill the burner. If any fuel does spill, you should

always wipe it up prior to lighting your fireplace.

Step 10

The curved ends in the handle provided (Part J) will fit into the

holes in the lid of the burner. You can adjust the flame height to

get the desired flame height and heat output. When you are ready

to extinguish the fireplace, use the handle to slide the lid of the

burner completely closed over the opening to cut off the oxygen

supply to the fuel. This will snuff out the flame.