Anywire AnyWireASLINK BL296PB-16F-4A-20 Produkthandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Produkthandbuch für Touch-Terminals Anywire AnyWireASLINK BL296PB-16F-4A-20 herunter. Anywire AnyWireASLINK BL296PB-16F-4A-20 17 Seiten.
[Data Configuration]
BL296SB-16F-4A-20, BL296SB-16FS-4A-20
Address
n+15 n+14 n+13 n+12 n+11 n+10
offset
Bit input
IN15
IN14
BL296PB-16F-4A-20, BL296PB-16FS-4A-20
Address
n+15 n+14 n+13 n+12 n+11 n+10
offset
OUT15 OUT14
Bit output
BL296XB-16F-4A-20, BL296XB-16FS-4A-20
Address
n+7
n+6
offset
IN7
Bit input
OUT7 OUT6
Bit output
■Status details
The contents of an alarm detected with this unit can be checked with the "status detail area
on the master unit.
A bit corresponding to the status detail area turns ON depending on the contents of the alarm.
Status detail area of the master unit
Status
b15
b14
details
b0: Slave unit voltage drop (DP-DN-side voltage drop)
b5: I/O power supply drop (24V-0V-side voltage drop)
*
1 This can be used on the master unit having the status detail area. For details, refer to the manual for the master unit.
[Monitor Display]
LED name
Display status
Lit
LINK
Flashing
(Green)
Unlit
Lit
ALM
Flashing
(Red)
Unlit
Alternate ashing
LINK
LINK
ALM
ALM
LINK
LINK
ALM
ALM
Lit
I/O
(Orange)
Unlit
*
2 This indication appears when the use of the single unit simpli ed replacement function fails.
(This operation occurs on the S/W version "B" or later version.)
*
3 If ID duplication is detected when the master unit executes automatic address recognition,
this indication appears.
*
4 For S/W version "B" or later version: This indication appears when transmission signal and
power supply are normally connected, and the unit is set to the factory-set address.
For S/W version "A" or 3-digit lot No.: This condition is detected when the master unit
executes automatic address recognition.
IN13
IN12
IN11
OUT13
OUT12
OUT11
n+5
n+4
n+3
IN6
IN5
IN4
IN3
OUT5
OUT4
OUT3
b13
b12
b11
Description
Transmission signal error
Model mismatching error *
Transmission signal received
No transmission signal (disconnection and
reverse connection of DP and DN lines included)
I/O power supply drop
Slave unit voltage drop
Model mismatching error *
No ALM available
ID duplicated *
or ID unregistered *
3
Model mismatching error *
ON
OFF
-BL296*B16F*4A20 10/17-
n+9
n+8
n+7
IN10
IN9
IN8
IN7
n+9
n+8
n+7
OUT10 OUT9 OUT8
OUT7 OUT6
n+2
n+1
n
IN2
IN1
IN0
OUT2 OUT1 OUT0
b10
b9
b8
b7
2
2
4
2
*
n = Bit address number assigned to this unit
n+6
n+5
n+4
n+3
IN6
IN5
IN4
IN3
n+6
n+5
n+4
n+3
OUT5
OUT4
OUT3
*
1
"
b6
b5
b4
b3
LED indicators
ALM
LINK
LINK
OUT 0
IN 0
I/O 0
OUT 1
IN 1
I/O 1
OUT 2
IN 2
I/O 2
OUT 3
IN 3
I/O 3
IN 4
OUT 4
I/O 4
IN 5
OUT 5
I/O 5
IN 6
OUT 6
I/O 6
OUT 7
IN 7
I/O 7
BL296XB-16F□-4A-20
If an error is indicated, identify a cause of the error by
checking lit/ ashing status with the table on the left, and
eliminate the cause of the error.
Once the cause of the error is eliminated, the error
indication will be automatically reset.
n+2
n+1
n
IN2
IN1
IN0
n+2
n+1
n
OUT2 OUT1
OUT0
b2
b1
b0
ALM
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
BL296SB-16F□-4A-20
BL296PB-16F□-4A-20