Dancing Wings Hobby S19 Installationsanweisungen und technische Informationen - Seite 2
Blättern Sie online oder laden Sie pdf Installationsanweisungen und technische Informationen für Spielzeug Dancing Wings Hobby S19 herunter. Dancing Wings Hobby S19 2 Seiten. Mini tiger moth balsawood airplane
Seite drucken
轻木条
Balsawood strip
按实际长度截取
Cut off as per the actual length
D27-1
D27
舵机安装位置
servo installation position
各组件组装 Components Installation
碳杆
21
300mm
carbon rod
Ø7m
Ø3m
Ø3m
Ø7m
自锁螺母
自攻螺丝
Self-locking nuts
Self-tapping screw
24
自攻螺丝
Self-tapping screw
25
在机头部安装头罩，按所需颜色进行喷
漆，用自攻螺丝固定到机身。
Install the cowling at the head of
fuselage,paint in any color as per your
needs,finally firm with self-tapping
screws onto the fuselage.
D18
D30
副翼组装
20
Aileron Assembly
组装好的副翼通过纸合页和
机翼连接在一起，使副翼可
以45度摆动。
Connect the aileron with wing by
D19
paper hinges,make sure the aileron
could swing 45 degree.
22
23
此处Z1-Z4支架配件为1:1大小，请对
比此图找出配件进行安装。
Z1
Z3
Here are the 1:1 plan for bracket
accessories Z1-Z4,pls find out and
螺丝+螺母
install as picture shown.
screws + nuts
Z1
Z4
Z3
Z2
26
自攻螺丝
Self-tapping screw
碳杆420mm
carbon rod
D14
D29
D29-1
D17
D12
D16
D28
D25
D13
Removable buckle
舵机及连杆安装图示
Installation of the Servo and Connection Rod
Z2
Z4
重心设置 C.G. Adjustment
≈70mm
可拆卸机翼，拉线安装图示
the wing is removable,the wiring installation as picture shown.
机翼为可拆卸设计，用拉线固定。拉线为一条线，按下图顺序安装。
Wing is removable,and firm with one wiring. Assemble the wiring in order as picture below.
1为起始点，8为结束点，1和8用铝扣，固定在一起。
Start at point 1,and end at point 8,then connect 1 and 8 together by Aluminum buckle.
27
D15
可拆卡扣
卡扣
Clip
C.G
自攻螺丝