3onedata IAP2300R-4A25-2GT-P12 48 Handbuch zur Schnellinstallation
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drahtloser Zugangspunkt 3onedata IAP2300R-4A25-2GT-P12 48 herunter. 3onedata IAP2300R-4A25-2GT-P12 48 4 Seiten. Industrial roaming wireless ap
Seite druckenIAP2300R-4A25-2GT-P12_48
Industrial Roaming Wireless AP
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the industrial wireless AP for the first time.
1
Wireless AP x1
2
WIFI antenna x4
3
DIN-Rail mounting attachment
4
Wall mounting attachment (Optional)
5
Warranty card
6
Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is an industrial wireless AP. Its model is
IAP2300R-4A25-2GT-P12_48 (4 WIFI antenna interfaces + 1
Gigabit LAN port + 1 Gigabit WAN port that supports 48VDC
PoE power supply).
【Panel Design】
Rear view, top view and bottom view
Front view and Side view
1.
DIN-Rail mounting kit
2.
Power supply input terminal
3.
Reserved
4.
DIP switch
5.
CONSOLE Port
6.
Grounding screw
7.
Running indicator RUN
8.
2.4G WLAN indicator
9.
5G WLAN indicator
10.
WLAN bridge signal strength indicator
11.
LAN port connection indicator
12.
PoE connection indicator
13.
WAN port connection indicator
14.
2.4G WIFI antenna interface
15.
5G WIFI antenna interface
16.
Alarm indicator ALM
17.
Power supply indicator P1/P2
18.
Gigabit LAN port
19.
Gigabit WAN port
【Mounting Dimension】
Unit: mm
Note before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
Note:
This device supports DIN-rail mounting and wall
mounting that can be chosen according to needs.
【Wall-mounted Device Mounting】
Step 1
Use M3 screws to install the hanging board on the