Dancing Wings Hobby Savage Bobber Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Flugzeuge Dancing Wings Hobby Savage Bobber herunter. Dancing Wings Hobby Savage Bobber 8 Seiten. Balsawood scale airplane arf
Seite druckenQ1
03-5
Remove the servo compartment
cover from the wing,
and install the servos between
the small wooden blocks. When
installing the rudder arm, power
Q1
on the servos back to the center.
M3*15mm
03-6
Pass the servo wires into the
wing and lead out from the side
of the wing,The same opration
for two servos.
03-7
Self-tapping screw
M3x10mm
1.Install the servo compartment cover and fix it with self tapping screws
2.Then adjust the connecting rod to the appropriate length, and connect the connecting
rod to the servo horn
Install wing braces
03-8
H2 Short
H3
5
M3*15mm+Self locking nut
Hand screw
G2 Details
M4x15mm
H1
Long
There are
G1 Details
reserved screw
holes in the
corresponding
positions of the
picture,
and screw in
plastic screws to
fix G1 and G2.
G3 Details
H3
03-9
Carbon rod
Ø10x380mm
Carbon rod
Ø20x780mm
Details1
Details2
H1
H1
H2
Nut
F2
F2
H2
Self locking nut
M3*15mm+Self locking nut
H3
M3*10mm+Self locking nut
03-10
Hand screw
M4x30mm
Hand screw
M4x15mm
6